1/4" NPT to 4AN Turbo Feed Fitting - Restricted 1.8mm - BorgWarner
$16.00
BF697560621754
BenzForce Adapters for Holset
BorgWarner
BorgWarner s200sx-e
BorgWarner s300sx-e
Featured Products
om60PerformanceDan
Turbo Accessories
Turbochargers
This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 1.8mm. This will fit the BorgWarner turbos we sell. PROBLEM/ISSUE: We...
12AN Oil Drain Tube for Holset T25 - HE200, HE221
$31.00
BF684417820149
BenzForce Adapters for Holset
Featured Products
Forced Induction
Holset
Holset Adapters
Holset HE200, HE221 & Parts
Turbo Accessories
Turbochargers
Finding the odd-sized oil drain for the HE200 and HE221 can be a hassle. If you also consider the tight quarters of the core,...
12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400
$31.00
BF684417820156
BenzForce Adapters for Holset
BorgWarner
BorgWarner s200sx-e
BorgWarner s300sx-e
Featured Products
Forced Induction
Holset
Holset Adapters
Holset HE250 & Parts
Holset HE400 & Parts
Holset HX30 & Parts
Holset HX30 Super & Parts
Holset HX35, HE351 & Parts
Turbo Accessories
Turbochargers
This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35 and the HE400 Our extended drain tube clears the Holset...
3/4" Barb Oil Drain Tube for Holset T25 - HE200, HE221
$31.00
BF697560621273
BenzForce Adapters for Holset
Featured Products
Forced Induction
Holset
Holset Adapters
Holset HE200, HE221 & Parts
Turbo Accessories
Turbochargers
Finding the odd-sized oil drain for the HE200 and HE221 can be a hassle. Our extended drain tube clears the HE221 compressor housing allowing...
3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400
$31.00
BF697560621297
BenzForce Adapters for Holset
BorgWarner
BorgWarner s200sx-e
BorgWarner s300sx-e
Featured Products
Forced Induction
Holset
Holset Adapters
Holset HE250 & Parts
Holset HE400 & Parts
Holset HX30 & Parts
Holset HX30 Super & Parts
Holset HX35, HE351 & Parts
Turbo Accessories
Turbochargers
This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35, and the HE400 Our extended drain tube clears the Holset...
45° T3 12AN Turbo Oil Drain - HE250/HX30/HX35/HE351/HE400/BorgWarner
$41.00
BF697560621617
BenzForce Adapters for Holset
BorgWarner
BorgWarner s200sx-e
BorgWarner s300sx-e
Featured Products
Forced Induction
Holset
Holset Adapters
Holset HE250 & Parts
Holset HE400 & Parts
Holset HX30 & Parts
Holset HX30 Super & Parts
Holset HX35, HE351 & Parts
Turbo Accessories
Turbochargers
This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35, HE400 and BorgWarner Our extended drain tube clears the Holset...
45° T3 BARB Turbo Oil Drain - HE250/HX30/HX35/HE351/HE400/BorgWarner
$41.00
BF697560621600
BenzForce Adapters for Holset
BorgWarner
BorgWarner s200sx-e
BorgWarner s300sx-e
Featured Products
Forced Induction
Holset
Holset Adapters
Holset HE250 & Parts
Holset HE400 & Parts
Holset HX30 & Parts
Holset HX30 Super & Parts
Holset HX35, HE351 & Parts
Turbo Accessories
Turbochargers
This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35, HE400 and BorgWarner Our extended drain tube clears the Holset...
6R80 Transmission oil cooler fittings
$54.00
BF697560621563
Drivetrain
Doing a 6R80 swap and looking for an easy way to hook up cooling lines? This fitting kit may make your life a lot easier!...
8HP70 Dodge Driveshaft Adapter
$94.00
Drivetrain
Please measure your flange before ordering. Our transmission adapter will allow you to run a conventional driveshaft on transmissions like a 8HP70. Works in conjunction with a Dana Spicer...
BenzForce ALDA Cap
$30.00
BF697560621075
Engine Compartment
om606
om60PerformanceDan
om617
This anodized aluminum ALDA cap was created to give SuperPump builds more appeal. It is perfect for Mercedes M pumps with an outside ALDA...
BenzForce Keychain
$6.00
BF697560621686
Show your commitment to the community by sporting your keys on the BenzForce keychain. This keychain is a Polyester twill strap with a silkscreen printing...
BenzForce Wastegate Bracket for Holset HE221
$34.00
BF684417820194
BenzForce Adapters for Holset
Featured Products
Forced Induction
Holset
Holset Adapters
Holset HE200, HE221 & Parts
Turbo Accessories
Turbochargers
Upsell - HE221 Parts
Are you tired have trying to figure out how to clock your HE221? Our wastegate bracket eases the installation of the Holset HE221 in...
Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400
$41.00
BF684417820200
BenzForce Adapters for Holset
Featured Products
Holset
Holset Adapters
Holset HE250 & Parts
Holset HE400 & Parts
Holset HX30 Super & Parts
Holset HX35, HE351 & Parts
Turbo Accessories
Turbochargers
This fits the following turbos we carry: HE250, HX30 Super, HX35, HE351, and HE400 Our BenzForce turbo v-band to 2.5" coupler adapters for the...
Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221
$41.00
BF684417820217
BenzForce Adapters for Holset
Featured Products
Holset
Holset Adapters
Holset HE200, HE221 & Parts
Turbo Accessories
Turbochargers
Upsell - HE221 Parts
Our BenzForce turbo v-band to 2.5" coupler adapters for the compressor side of Holset turbos will save considerable time in fabrication! Made from 6061...
Compressor v-band to coupler adapter for Holset HX30 - 65mm
$41.00
BF684417820125
BenzForce Adapters for Holset
Featured Products
Holset
Holset Adapters
Holset HX30 & Parts
Turbo Accessories
Turbochargers
This does not fit the HX30 Super. Our BenzForce turbo v-band to 2.5" coupler adapters for the compressor side of Holset turbos will save...
Cylinder head 12AN water fitting - om606
$34.00
BF697560621761
Engine Compartment
om606
om60PerformanceDan
The BenzForce water fitting for the om606 cylinder head will ease your swap experience. Features: 12AN Thread 12 sided flange to position the outlet...
Differential Driveshaft Adapter fits Nissan 95mm - 350z
$94.00
BF697560621532
Drivetrain
Please measure your flange before ordering. This adapter will accommodate the 95mm 4-bolt flanges found on Nissans, such as the 350z, and allow you to run a...
EGR Gasket - om648
$13.00
BF697560621396
Engine Compartment
Featured Products
om648
Exhaust Gas Heat Exchanger to Charge Air Distributor Line This product is not longer available from the aftermarket (MB or our suppliers), so we...
Engine Mount Plates - m112, m113
$41.00
BF697560621341
Engine Compartment
m112 & m113
Our m112, m113 mount plates will make your engine swap much easier. These plates are cut from 1/4" mild steel right here in Texas.
EXCHANGE: Dieselmeken 7.5MM 120-140cc, om603, om606
$1,495.00
Dieselmeken
Engine Compartment
om606
Now you can have the best of Dieselmeken built right here in the USA. This saves you time and money! Please contact us before purchasing to...
EXCHANGE: Dieselmeken 7.5MM, om617 MW
$1,595.00
Dieselmeken
om617
** We do not accept cores with rack position sensors ** Now your om617 can have more power with Dieselmeken. Our exchange pump comes with...
EXCHANGE: Dieselmeken 8MM 140-160cc, om603, om606
$1,495.00
Dieselmeken
Engine Compartment
om606
Now you can have the best of Dieselmeken built right here in the USA. This saves you time and money! Please contact us before purchasing to...
Exhaust Gas Recirculation (EGR) Kit - m112, m113
$39.00
BF697560621297
Engine Compartment
m112 & m113
Our m112/m113 EGR Kits will keep your intake cleaner and keep the hot exhaust gas from robbing horsepower. This kit includes: Head block off...
Exhaust Gas Recirculation Plate - om648, 613
$41.00
BF697560621402
Engine Compartment
Featured Products
om648
This is also known as the "charge air distribution" system. Hoping to ditch the charge air system on the om648 you're swapping into a...
Exhaust Manifold Flange - m112, m113
$28.00
BF697560621358
Engine Compartment
m112 & m113
Are you looking to build a custom manifold for your m112/m113 swap? Look no further as BenzForce has you covered. Our 3/8" mild steel...
Exhaust Manifold to Turbocharger Gasket - om613, om648
$10.00
BF697560621624
Engine Compartment
Featured Products
om648
2005-2006 E320CDI
Ford 4.75" Driveshaft Adapter - 6R80
$94.00
BF697560621518
Drivetrain
Please measure your flange before ordering. Our Ford 4.75" adapter will allow you to run a conventional driveshaft on transmissions like a 6R80. Included:...
Gasket for Air Charge Pipe to Mixing Chamber - om613, om648
$17.00
613-098-01-80
Engine Compartment
Featured Products
om648
These gaskets are punched exclusively for BenzForce
Features:
Thickness: 1mm
Material: Stainless Steel
Gen II Oil Filter Housing Fittings - Black 10AN (Pair)
$52.00
BF684417820132
BenzForce Adapters for Holset
Engine Compartment
Featured Products
om606
om60PerformanceDan
Are you performing an engine swap and looking for a need a solution to hook up an oil cooler? With our 10AN fittings, you...
Holset 102mm exhaust v-band to 3" and 3.5" tube adapter - HX40/HE400
$49.00
$41.00
BF697560621662
BenzForce Adapters for Holset
Featured Products
Holset
Holset Adapters
Holset HE400 & Parts
Turbo Accessories
This adapter fits the HE400 turbo we sell or any 102mm Holset v-band outlet such as the larger HX40, and HX55 turbos The adapters are...
Holset 79mm exhaust v-band to 3" tube adapter - HE200/HE221/HE250/HX30 Super/HX35/HE351
$52.00
BF684417820118
BenzForce Adapters for Holset
Featured Products
Holset
Holset Adapters
Holset HE200, HE221 & Parts
Holset HE250 & Parts
Holset HX30 & Parts
Holset HX30 Super & Parts
Holset HX35, HE351 & Parts
Turbo Accessories
Upsell - HE221 Parts
This adapter fits the following turbos we carry: HE200, HE221, HE250, HE351, and HX35 We have seen people cut v-bands off of Holset turbos...
HX30 Super Oil Feed 4AN Restricted
$31.00
BF684417820231
BenzForce Adapters for Holset
Holset
Holset HX30 Super & Parts
Turbo Accessories
Turbochargers
We found that our customers were having a tough time finding oil feed fittings for their new HX30 Super turbos that were reasonably priced,...
Intake manifold to 3" adapter for om648, om613
$73.00
BF697560621419
Engine Compartment
Featured Products
om648
Are you swapping your om648 into a pre-emission vehicle and trying to tidy up the intake system? Swap out the factory mixing chamber for...
M10 to 4AN Turbo Feed Fitting
$7.00
BF697560621082
Holset
Holset HE200, HE221 & Parts
Turbo Accessories
Turbochargers
This fitting eases the installation of the HE2xx (T25) turbos we sell. Fittings come with a crush washer. Inlet size: 4AN Outlet: M10 x...
M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221
$18.00
BF697560621242
BenzForce Adapters for Holset
Holset
Holset HE200, HE221 & Parts
om617
Turbo Accessories
Turbochargers
This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 1.68mm. This will fit the HE200 and HE221 Holset turbos...