Many people ask us when items will be available. Currently our AML (approved manufacturer list) for CNC includes 3 shops. We are working to expand that but, as always, quality and pricing impacts our decision to move forward. Before BenzForce trusts a machine shop with critical, core, offerings, machining on prototype parts and lower quantities are performed which extends the time to bring a partner into the mix.
Sheet metal work is performed by a company in Dallas, TX and unfortunately we lost a partner here in the Austin area. They could not financially recover from the significant damage and loss of customer business from our ice storms years ago.
Below is a list of our current backlog of items in the manufacturing queue. Estimated date is the date machining will be complete and packing started, not the date the product goes into inventory. We will attempt to keep this up to date so you remain informed:
| Description | Est. Date |
| 12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400 | 2026-10-31 |
| 12AN to Block Turbo Drain Fitting - om602, om603, om606 | 2026-10-31 |
| 3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400 | 2026-10-31 |
| Mercedes to Dodge Hemi 8HP70 - om648, om613 | 2026-10-31 |
| Cylinder head 12AN water fitting Gen II - om606 - Received hold downs, waiting on fittings | 2026-10-31 |
| EGR Gasket - om648 | 2026-10-31 |
| Engine Mount Plates - om602, om603, om606, om613, om648 | 2026-10-31 |
| Exhaust Gas Recirculation Plate - om648, 613 | 2026-10-31 |
| Gasket for Air Charge Pipe to Mixing Chamber - om613, om648 | 2026-10-31 |
| Gen II Oil Filter Housing Fittings - Black 10AN (Pair) | 2026-10-31 |
| Head EGR Kit - m120 - Received, waiting on gaskets | 2026-10-31 |
| M16 Block to 4AN feed fitting - om602, om606, om603, om604, om605 | 2026-10-31 |
| Oil Cooler Fittings (Pair) - m113, m113k, m156 | 2026-10-31 |
| Oil Filter Relocation Plate - om606, om603 | 2026-10-31 |
| om606 Fuel Heater Block Off Plate | 2026-10-31 |
| om617 12AN Drain Tube - Received, waiting on gaskets | 2026-10-31 |
| Secondary air block offs - m112, m113 | 2026-10-31 |
| Water housing fitting 12AN - om606 | 2026-10-31 |
| Crank (not just pulley) pin kit | 2026-10-31 |
| Block turbo drain drill kit | 2026-10-31 |
Here are the current offerings we are working on and their status. There is NO ETA on these. Once our queue clears up a bit, we will be working on vehicle specific kits for domestic vehicles (USA).
| Description | Status | Notes |
| Om606 Pump mount | Design Complete | |
| om606 twin scroll manifold | Design Complete | |
| Fuel tank sump | Design Complete | Low priority – needed for BMW swap |
| om606 / CD009 adapter | In Design | Latest revision is in transit from machinist. Prototype will use ACT clutches compatible with Nissan |
| High flow om606 fuel filter head | In Design | Uses a 4BT filter |
| Oil filter head | In Design | Thermostatically controlled filter head. |
| om606 Intake manifold | In Design | Waiting on 3D print |
| Block cooling kit | Pending | |
| CAN Sensor harness | Pending | Looking for the best CAN module for digital dash communication |
| om603 pump rack dampener | Pending | Lots of internal discussion about the best solution for the appropriate solution |
| Turbo water cooling kit | Pending | For water cooled turbos |
| Kit: Premium fuel delivery | Pending | AEM and Fuel lab, pump, strainer, regulator and pressure gauge |
| Kit: Pump upgrade | Pending | Exchange pump with injectors |
| Kit: Stage 1 head | Pending | Springs, gaskets, valve stem seals, etc |
| Kit: Stage 2 head | Pending | Springs, gaskets, valve stem seals, etc |
| Kit: Swap solution < 350hp | Pending | Pump, turbo, wastegate, manifold, boost controller, etc |
| Kit: Swap solution <= 450hp | Pending | Pump, turbo, wastegate, manifold, boost controller, etc |
| Kit: Swap solution > 450hp | Pending | Pump, turbo, wastegate, manifold, boost controller, etc |