Holset HE400 & Parts

Holset

Holset HE400WG 3788087 3795515

$550.00

This listing is for a new Genuine HE400WG with 16cm2 housing. This is a great turbo for upgrades or factory replacement on certain non-Mercedes engines....

HE351/HX35 (74mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400

$39.00

This fits the following turbos we carry: HE250, HX30 Super, HX35, HE351, and HE400 Our BenzForce turbo v-band to 2.5" coupler adapters for the...

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

Quick View

BenzForce

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

$49.00

Upgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line? Our 12AN drain is large enough...

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

Quick View

BenzForce

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

$29.00

This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35 and the HE400 Our extended drain tube clears the Holset...

Quick View

BenzForce

T3 Spacer with extended studs

$39.00

When installing a T3 turbo on a factory exhaust manifold, it's common to run into clearance issues while trying to clock your turbo. Our...

Quick View

Epman

EPMAN Turbo Oil Feed Adapter Kit M12x1.5mm to 4AN

$7.50

These are restricted oil fittings that go from a M12x1.5mm to a 4AN fitting. Engines with super high oil pressure need to be restricted...

Quick View

Epman

T3 Oil Drain Gasket

$1.00

This T3 oil drain gasket will fit our HX30, HE351 and HX35 turbos. Note that the oil drain opening is square and those turbos...

Exhaust Clamp for Holset Turbos - 79mm - HE200/HE221/HE250/HX30/HX30 Super/HX35/HE351/HE400

Quick View

Cummins/DCEC

Exhaust Clamp for Holset Turbos - 79mm - HE200/HE221/HE250/HX30/HX30 Super/HX35/HE351/HE400

$11.99

This clamp fits the exhaust housing on all the Holset turbos we sell. The exhaust v-band on our Holsets are 79mm. This clamp is...

Quick View

BenzForce

M12 to 4AN Turbo Feed Fitting

$5.75

This fitting eases the installation of the T3 (HX30, HX35, HE351) turbos we sell. Fittings come with a crush washer. Inlet size: 4AN Outlet: M12...

Compressor outlet clamp (Holset HX35 & HE351)

Quick View

Dongfeng-Cummins Engine Company Co (DCEC)

Compressor outlet clamp for Holset 74mm - HE250/HX30 Super/HX35/HE351/HE400

$10.00

This clamp fits our HE250, HX30 Super, HX35, HE351, and HE400 DCEC compressor outlet clamp. Dongfeng-Cummins Engine Company Co (DCEC) is a 50:50 Joint...

Quick View

Dongfeng-Cummins Engine Company Co (DCEC)

T3 Divided (Twin Scroll) Turbo Gasket

$7.00

This is an divided T3 turbo gasket that fits the HE351, HX35 and HX30 turbos listed on our site. The HX35 and HE351 are...

Quick View

Dongfeng-Cummins Engine Company Co (DCEC)

Compressor v-band seal/o-ring for Holset - 74mm - HE250/HX30 Super/HX35/HE351/HE400

$8.00

This o-ring fits the following turbos we stock: HE250, HX30 Super, HX35, HE351 and HE400 Part number 3883284 is the seal between the compressor...

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

Quick View

BenzForce

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

$12.00

This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 2mm. This will fit the T3 Holset turbos we sell....