We've got Holset turbos

BenzForce

Holset 79mm exhaust v-band to 3" tube adapter - HE200/HE221/HE250/HX30 Super/HX35/HE351

$49.00

This adapter fits the following turbos we carry: HE200, HE221, HE250, HE351, and HX35 We have seen people cut v-bands off of Holset turbos...

HE351/HX35 (74mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400

$39.00

This fits the following turbos we carry: HE250, HX30 Super, HX35, HE351, and HE400 Our BenzForce turbo v-band to 2.5" coupler adapters for the...

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

Quick View

BenzForce

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

$49.00

Upgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line? Our 12AN drain is large enough...

HE221 (56mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221

$39.00

Our BenzForce turbo v-band to 2.5" coupler adapters for the compressor side of Holset turbos will save considerable time in fabrication! Made from 6061...

om60x Turbo Oil Feed Kit - om602, om603, om606

Quick View

BenzForce

om60x Turbo Oil Feed Kit - om602, om603, om606

$52.00

End your struggles finding an odd block fitting and oil feed line for your om60x turbo swap; BenzForce has you covered! Our oil feed kit for...

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

Quick View

BenzForce

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

$29.00

This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35 and the HE400 Our extended drain tube clears the Holset...

T25 to T3 Turbo Adapter - Stainless Steel

Quick View

BenzForce

T25 to T3 Turbo Adapter - Stainless Steel

$89.00

Having trouble adapting your T25 turbo to a T3 flange? We have heard your cries and come out with our T25 to T3 adapter...

Compressor Elbow Kit for Holset HE2xx - 56mm - HE200, HE221

Quick View

Cummins/DCEC

Compressor Elbow Kit for Holset HE2xx - 56mm - HE200, HE221

$42.00

Make the installation of your Holset, DCEC or Cummins HE221 easier with our HE221 compressor elbow kit. Our kit comes with a 90 degree...

Quick View

BenzForce

BenzForce Wastegate Bracket for Holset HE221

$32.00

Are you tired have trying to figure out how to clock your HE221? Our wastegate bracket eases the installation of the Holset HE221 in...

Quick View

Holset

Holset HX30W (Super) 4051167 2835278

$625.00

This listing is for a new Genuine Holset HX30W with 6 cm2 housing. This is a great turbo for upgrades or factory replacement (on...

HX30 (65mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset HX30 - 65mm

$39.00

This does not fit the HX30 Super. Our BenzForce turbo v-band to 2.5" coupler adapters for the compressor side of Holset turbos will save...

M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221

Quick View

BenzForce

M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221

$17.00

This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 1.68mm. This will fit the HE200 and HE221 Holset turbos...

Quick View

Holset

Holset HE221W 4047745 4047746 HE221 (7cm)

$589.00

This listing is for a new Genuine Holset HE221W with 7 cm2 housing. This is a great turbo for upgrades or factory replacement on...

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

Quick View

BenzForce

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

$17.00

This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 2mm. This will fit the T3 Holset turbos we sell....

Quick View

BenzForce

3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

$29.00

This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35, and the HE400 Our extended drain tube clears the Holset...

HX30 Compressor Elbow Kit for Holset and Cummins Turbos

Quick View

Cummins/DCEC

Compressor Elbow Kit for Holset HX30 - 65mm

$42.00

This does not fit the HX30 Super Make the installation of your Holset, DCEC or Cummins HX30 easier with our HX30 compressor elbow kit. Our...

Quick View

Holset

Holset HX30W 4040353 4040382

$575.00

This listing is for a new Genuine Holset HX30W with 6 cm2 housing. This is a great turbo for upgrades or factory replacement (on...

Quick View

BenzForce

om60x - 3/4" Barb to Block Turbo Drain Fitting (om602, om603, om606)

$49.00

Upgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line? Our 3/4" barb drain is large enough...

Quick View

Cummins/DCEC

Cummins/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221

$42.00

This four bolt flange fits the HE221 5.5cm2 and 7cm turbos we sell. The 7cm2 housing HE221 has a 5 bolt flange but this...

12AN Oil Drain Tube for Holset T25 - HE200, HE221

Quick View

BenzForce

12AN Oil Drain Tube for Holset T25 - HE200, HE221

$29.00

Finding the odd-sized oil drain for the HE200 and HE221 can be a hassle. If you also consider the tight quarters of the core,...

Quick View

Cummins/DCEC

T3 Turbo Gasket

$12.00

This is an open T3 turbo gasket that fits the HE351, HX35 and HX30 turbos listed on our site. The HX35 and HE351 are...

Quick View

BenzForce

3/4" Barb Oil Drain Tube for Holset T25 - HE200, HE221

$29.00

Finding the odd-sized oil drain for the HE200 and HE221 can be a hassle. Our extended drain tube clears the HE221 compressor housing allowing...

Quick View

BenzForce

M12 to 4AN Turbo Feed Fitting

$5.75

This fitting eases the installation of the T3 (HX30, HX35, HE351) turbos we sell. Fittings come with a crush washer. Inlet size: 4AN Outlet: M12...

Quick View

BenzForce

T3 Oil Drain Gasket

$1.00

This T3 oil drain gasket will fit our HX30, HE351 and HX35 turbos. Note that the oil drain opening is square and those turbos...

Quick View

Epman

EPMAN Turbo Oil Feed Adapter Kit M12x1.5mm to 4AN

$7.50

These are restricted oil fittings that go from a M12x1.5mm to a 4AN fitting. Engines with super high oil pressure need to be restricted...

Sold out

Quick View

Holset

Holset HX35W 12CM

$550.00

This listing is for a new Genuine Holset HX35W with 12 cm2 housing. This is a great turbo for upgrades or factory replacement. BenzForce...

Quick View

Holset

Holset HX35W 8CM

$550.00

This listing is for a new Genuine Holset HX35W with 8cm2 housing. This is a great turbo for upgrades or factory replacement. BenzForce sells...

Quick View

Holset

Holset HE221W 3782369 3782376 HE221 (5.5 cm)

$519.00

This listing is for a new Genuine Holset HE221W with 5.5 cm2 housing. This is a great turbo for upgrades or factory replacement on...

Quick View

BenzForce

om617 3/4" Drain Tube

$29.00

Upgrading your turbo and need a better drain setup? Consider our 3/4" barb drain tube specifically designed for the om617. The tube includes a...

Quick View

BenzForce

HX30 Super Oil Feed 4AN Restricted

$29.00

We found that our customers were having a tough time finding oil feed fittings for their new HX30 Super turbos that were reasonably priced,...

Quick View

BenzForce

M10 to 4AN Turbo Feed Fitting

$5.75

This fitting eases the installation of the HE2xx (T25) turbos we sell. Fittings come with a crush washer. Inlet size: 4AN Outlet: M10 x...

Quick View

Cummins/DCEC

DCEC Turbine Outlet Gasket for Holset HE2xx - HE200, HE221

$10.99

This is the gasket for the vband flange adapter plate that mounts to the turbine side of the turbo

Quick View

BenzForce

T3 Spacer with extended studs

$49.00

When installing a T3 turbo on a factory exhaust manifold, it's common to run into clearance issues while trying to clock your turbo. Our...

Quick View

BenzForce

om617 Turbo Oil Feed Kit

$39.00

End your struggles finding an odd filter housing fitting and oil feed line for your om617 turbo swap; BenzForce has you covered! Our oil feed kit...

om617 HE221 (T25) Installation Kit for Holset Turbos - 12AN

Quick View

BenzForce

om617 HE221 (T25) Installation Kit for Holset Turbos - 12AN

$299.00

Mounting a Holset HE221 or other T25 frame turbo to your om617 can be a total pain in the ass but it doesn't have to...

Quick View

BenzForce

om606 (KKK) Turbo Exhaust Gasket

$15.00

These stainless gaskets are manufactured exclusively for BenzForce. No more exhaust leaks on your 606 factory manifold!

		Compressor		Turbine
Model	Turbine Housing	Inducer	Exducer	Inducer	Exducer
HE200wg	7cm	42	58	50	44
HE221w Billet	7cm	44	60	52	46
HE221w	7cm	44	60	50	46
HE221w	5.5cm	42.5	58.5	50	44
HE250w	10cm	47	70	59	54
HX30w	6cm	44	72	65	52
HX30 Super	6cm	46			52
HX35w	12cm	56	82	70	60
HX35w	8cm	54	82	70	60
HE351w Billet	12cm	58	85	70	60
HE351w	12cm	58	85	70	60
HE400wg	16cm	60	86	74	64

Holset 79mm exhaust v-band to 3" tube adapter - HE200/HE221/HE250/HX30 Super/HX35/HE351

Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221

om60x Turbo Oil Feed Kit - om602, om603, om606

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

T25 to T3 Turbo Adapter - Stainless Steel

Compressor Elbow Kit for Holset HE2xx - 56mm - HE200, HE221

BenzForce Wastegate Bracket for Holset HE221

Holset HX30W (Super) 4051167 2835278

Compressor v-band to coupler adapter for Holset HX30 - 65mm

M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221

Holset HE221W 4047745 4047746 HE221 (7cm)

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

Compressor Elbow Kit for Holset HX30 - 65mm

Holset HX30W 4040353 4040382

om60x - 3/4" Barb to Block Turbo Drain Fitting (om602, om603, om606)

Cummins/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221

12AN Oil Drain Tube for Holset T25 - HE200, HE221

T3 Turbo Gasket

3/4" Barb Oil Drain Tube for Holset T25 - HE200, HE221

M12 to 4AN Turbo Feed Fitting

T3 Oil Drain Gasket

EPMAN Turbo Oil Feed Adapter Kit M12x1.5mm to 4AN

Holset HX35W 12CM

Holset HX35W 8CM

Holset HE221W 3782369 3782376 HE221 (5.5 cm)

om617 3/4" Drain Tube

HX30 Super Oil Feed 4AN Restricted

M10 to 4AN Turbo Feed Fitting

DCEC Turbine Outlet Gasket for Holset HE2xx - HE200, HE221

T3 Spacer with extended studs

om617 Turbo Oil Feed Kit

om617 HE221 (T25) Installation Kit for Holset Turbos - 12AN

om606 (KKK) Turbo Exhaust Gasket

Recently Viewed Products

Your cart

Popular Products

Customer Login

Recently Viewed Products

Your cart