Holset HX30 Super & Parts

Holset

Holset HX30W (Super) 4051167 2835278

$625.00

This listing is for a new Genuine Holset HX30W with 6 cm2 housing. This is a great turbo for upgrades or factory replacement (on...

Quick View

BenzForce

HX30 Super Oil Feed 4AN Restricted

$29.00

We found that our customers were having a tough time finding oil feed fittings for their new HX30 Super turbos that were reasonably priced,...

Quick View

BenzForce

Holset 79mm exhaust v-band to 3" tube adapter - HE200/HE221/HE250/HX30 Super/HX35/HE351

$40.00

This adapter fits the following turbos we carry: HE200, HE221, HE250, HE351, and HX35 We have seen people cut v-bands off of Holset turbos...

HE351/HX35 (74mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400

$39.00

This fits the following turbos we carry: HE250, HX30 Super, HX35, HE351, and HE400 Our BenzForce turbo v-band to 2.5" coupler adapters for the...

Quick View

BenzForce

HX30 Super Builder's Kit

$179.00

This kit will not space the HX30 Super away from the om617 enough to clear the intake manifold. The HX30 Super is different than...

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

Quick View

BenzForce

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

$29.00

This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35 and the HE400 Our extended drain tube clears the Holset...

Quick View

BenzForce

om617 12AN Drain Tube

$29.00

Upgrading your turbo and need a better drain setup? Consider our 12AN drain tube specifically designed for the om617. The tube includes a new pan...

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

Quick View

BenzForce

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

$49.00

Upgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line? Our 12AN drain is large enough...

Quick View

BenzForce

T3 Spacer with extended studs

$39.00

When installing a T3 turbo on a factory exhaust manifold, it's common to run into clearance issues while trying to clock your turbo. Our...

Quick View

Epman

T3 Oil Drain Gasket

$1.00

This T3 oil drain gasket will fit our HX30, HE351 and HX35 turbos. Note that the oil drain opening is square and those turbos...

Quick View

Dongfeng-Cummins Engine Company Co (DCEC)

T3 Turbo Gasket

$7.00

This is an open T3 turbo gasket that fits the HE351, HX35 and HX30 turbos listed on our site. The HX35 and HE351 are...

Quick View

BenzForce

M12 to 4AN Turbo Feed Fitting

$5.75

This fitting eases the installation of the T3 (HX30, HX35, HE351) turbos we sell. Fittings come with a crush washer. Inlet size: 4AN Outlet: M12...

Compressor outlet clamp (Holset HX35 & HE351)

Quick View

Dongfeng-Cummins Engine Company Co (DCEC)

Compressor outlet clamp for Holset 74mm - HE250/HX30 Super/HX35/HE351/HE400

$10.00

This clamp fits our HE250, HX30 Super, HX35, HE351, and HE400 DCEC compressor outlet clamp. Dongfeng-Cummins Engine Company Co (DCEC) is a 50:50 Joint...

Quick View

Dongfeng-Cummins Engine Company Co (DCEC)

Compressor v-band seal/o-ring for Holset - 74mm - HE250/HX30 Super/HX35/HE351/HE400

$8.00

This o-ring fits the following turbos we stock: HE250, HX30 Super, HX35, HE351 and HE400 Part number 3883284 is the seal between the compressor...

Quick View

BenzForce

om60x - 3/4" Barb to Block Turbo Drain Fitting (om602, om603, om606)

$49.00

Upgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line? Our 3/4" barb drain is large enough...

Quick View

BenzForce

om617 3/4" Drain Tube

$29.00

Upgrading your turbo and need a better drain setup? Consider our 3/4" barb drain tube specifically designed for the om617. The tube includes a...

Quick View

BenzForce

3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

$29.00

This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35, and the HE400 Our extended drain tube clears the Holset...

Quick View

BenzForce

om606 KKK Exhaust Gasket

$15.00

These stainless gaskets are manufactured exclusively for BenzForce. No more exhaust leaks on your 606 factory manifold!

Quick View

BenzForce

KKK to T3 Turbo Adapter

$329.00

This adapter is machined from a solid piece of stainless steel and offers a smooth taper from the om606's KKK flange to a T3...

Quick View

BenzForce

M16 Block to 4AN feed fitting

$19.00

End your struggles finding an odd M16 to 4AN fitting for your om60x turbo swap; BenzForce has you covered! Our aluminum fittings feature a...

Quick View

BenzForce

om60x Turbo Oil Feed Kit

$45.25

End your struggles finding an odd block fitting and oil feed line for your om60x turbo swap; BenzForce has you covered! Our oil feed kit for...

Categories

Refined by

Brands Clear

Holset HX30W (Super) 4051167 2835278

HX30 Super Oil Feed 4AN Restricted

Holset 79mm exhaust v-band to 3" tube adapter - HE200/HE221/HE250/HX30 Super/HX35/HE351

Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400

HX30 Super Builder's Kit

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

om617 12AN Drain Tube

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

T3 Spacer with extended studs

T3 Oil Drain Gasket

T3 Turbo Gasket

M12 to 4AN Turbo Feed Fitting

Compressor outlet clamp for Holset 74mm - HE250/HX30 Super/HX35/HE351/HE400

Compressor v-band seal/o-ring for Holset - 74mm - HE250/HX30 Super/HX35/HE351/HE400

om60x - 3/4" Barb to Block Turbo Drain Fitting (om602, om603, om606)

om617 3/4" Drain Tube

3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

om606 KKK Exhaust Gasket

KKK to T3 Turbo Adapter

M16 Block to 4AN feed fitting

om60x Turbo Oil Feed Kit

Recently Viewed Products

Your cart

Holset HX30 Super & Parts

Categories

Refined by Clear all

.cls-1{fill:#231f20} Brands Clear

Recently Viewed Products

Your cart

Refined by

Brands Clear