BenzForce Adapters for HolsetBorgWarnerBorgWarner s200sx-eBorgWarner s300sx-eFeatured Productsom60PerformanceDanTurbo AccessoriesTurbochargers
This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 1.8mm. This will fit the BorgWarner turbos we sell. PROBLEM/ISSUE: We...
These fittings are perfect for adapting the om617 oil filter housing to 10AN hose fittings! Two fittings are included. If using in conjunction with an...
Please measure your flange before ordering. Our transmission adapter will allow you to run a conventional driveshaft on transmissions like a 8HP70. Works in conjunction with a Dana Spicer...
T3 Open Inlet 3.625" V Band Outlet Turbine Housing Standard T3 Inlet Turbine Housing with a 3.625" Outside Diameter V Band Outlet. Housing is interchangeable with...
T3 Open Inlet 3.625" V Band Outlet Turbine Housing Standard T3 Inlet Turbine Housing with a 3.625" Outside Diameter V Band Outlet. Housing is interchangeable with...
For s300 with 68mm turbine wheel Standard T3 Inlet Turbine Housing with a 3.625" Outside Diameter V Band Outlet. Housing is interchangeable with other standard 3"...
For s300 with 73mm turbine wheel Standard T3 Inlet Turbine Housing with a 3.625" Outside Diameter V Band Outlet. Housing is interchangeable with other standard 3"...
Standard T3 Divided Inlet (Twin Scroll) Turbine Housing with a 3.625" Outside Diameter V Band Outlet. Housing is interchangeable with other standard 3" V...
Show your commitment to the community by sporting your keys on the BenzForce keychain. This keychain is a Polyester twill strap with a silkscreen printing...
BenzForce Adapters for HolsetFeatured ProductsHolsetHolset AdaptersHolset HE200, HE221 & PartsTurbo AccessoriesTurbochargersUpsell - HE221 Parts
Our BenzForce turbo v-band to 2.5" coupler adapters for the compressor side of Holset turbos will save considerable time in fabrication! Made from 6061...