Upgrade your existing Mercedes-Benz OM606 mechanical injection pump with genuine Dieselmeken 8mm elements, professionally installed and calibrated in the USA.
This service upgrades your existing injection pump, which is returned to you after completion. You do not receive a replacement or exchange pump.
Enjoy Dieselmeken performance without the additional time and expense of shipping your pump overseas.
Please contact BenzForce before purchasing if you have questions about your pump's condition or suitability for this upgrade.
Upgrade Specifications
- Service Type: Upgrade your existing injection pump
- Injection Elements: Genuine Dieselmeken 8mm elements
- Maximum Governor Calibration: 185cc
- ALDA Calibration: 140cc
- ALDA Adjustment: Adjustable; see Dieselmeken's ALDA adjustment video
- Required Installation Timing: 8–10° ATDC on the compression stroke
- High Idle Magnet: Installed facing downward to help prevent shipping damage; may remain in this orientation during operation
- Service Location: USA
How the Upgrade Works
- Purchase the Build Your Core injection pump upgrade from BenzForce.
- Drain all oil from your injection pump and securely bag it to prevent leakage.
- Package your pump carefully to protect it against shipping damage.
- Ship your pump to the service address below using a tracked and insured shipping service.
- Your existing injection pump will be upgraded with Dieselmeken 8mm elements, calibrated, and returned to you.
Ship Your Pump:
- Include a copy of your emailed receipt
- Use the shipping address exactly as provided. Do not apply automatic address corrections.
- UPS and FedEX only, USPS will not deliver to this address!
- Important Shipping Information: Carriers may refuse, discard, or deny reimbursement for packages leaking oil. BenzForce strongly recommends draining, bagging, and insuring your pump before shipment.
Metrik Werks, LLC
107 Conley Ln
Lake Placid, FL 33852
Installation Requirements
All applicable OM60x M-style injection pumps must be installed and timed to 8–10° ATDC on the compression stroke. Refer to the OM606 service manual available under Resources → OM606 → OM606 Manuals, Chapter 7, procedure 07.1-8410. An appropriate injection pump locking tool is recommended for installation. These are often found on eBay if needed.
BenzForce does not install injection pumps on customer vehicles or perform vehicle repair services.
Warranty
- Lifetime Warranty: Dieselmeken injection elements and labor associated with their installation
- 90-Day Warranty: Other upgrade workmanship, seals, gaskets, and related components
- Warranty is void if evidence of non-diesel fuel use or unauthorized calibration tampering is found.
- Warranty coverage applies only to the original purchaser and is non-transferable.
- Customers are responsible for shipping charges to BenzForce for warranty service. BenzForce covers return shipping for approved warranty work.
Troubleshooting & Technical Support
BenzForce will make reasonable efforts to assist customers with troubleshooting. However, many installation-related issues require hands-on diagnosis that cannot be performed remotely.
Common installation issues include:
- Air trapped in the injection lines
- Missing restrictor banjo bolt on the engine side of the pump
- Incorrect injection pump stroke or installation position
- Incorrect pump timing
- Internal rack pins displaced during shipping
If the injection pump does not operate correctly after installation, verify the fuel supply, air removal, timing, and installation procedure before assuming an internal pump problem.
Shipping impacts can occasionally dislodge rack pins. Internal inspection or repair should be performed by a qualified technician to avoid further damage.
Questions Before Ordering?
Contact BenzForce to discuss your injection pump and performance goals before purchasing. We'll help clarify the upgrade process and requirements for your application. Just use the contact form on the website.