Are you performing an om606/716 swap in your w123? Our transmission mount will not only make the task easier but it will also improve the support of your transmission as it was designed to use the GM transmission mount of your choice. It was designed with the expectation that the engine is place approximately 3" from the firewall when measured to the back of the cylinder head
This mount is made from thick 1/4" plate, cut on a waterjet and bent locally in Austin, TX. The transmission support bracket and the cross member require welding of the gussets and the application of the surface treatment of your choice (paint, powder coat, etc).
Use the existing cross member and transmission mount hardware. The mount is not included. Pictures show a "Energy Suspension 3.1108R Transmission Mount for GM" which has a wide range of GM applications that can be easily cross referenced.
Tolerances surrounding the lock out cable mount are very close. Should your engine not be perfectly centered or you run into issues, simply clearance the cross member with a tool such as an angle grinder and flap disc. This should normally not be required and minimal material should be required to be removed.
w123/om606 and w123/om603 engine mounts coming soon.