{"product_id":"crank-pin-kit-om606-om648","title":"OM606 \/ OM648 Crankshaft Dowel Pin Kit – Pulley \u0026amp; Timing Sprocket Reinforcement","description":"\u003cp\u003eSecure your Mercedes OM606 or OM648 crankshaft pulley and timing sprocket with the BenzForce Crankshaft Dowel Pin Kit.\u003c\/p\u003e\n\u003cp\u003eDesigned for performance engine builds, this kit provides additional mechanical engagement between the crankshaft and pulley assembly, reducing reliance on the factory Woodruff key alone.\u003c\/p\u003e\n\u003cp\u003eOur precision-machined drilling fixture features an integrated \u003cstrong\u003e3\/8-inch square drive\u003c\/strong\u003e, eliminating the protruding socket head found on some competing designs. This provides improved drill access and makes installation easier.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Mercedes OM606 and OM648 engines\u003c\/li\u003e\n\u003cli\u003eReinforces the factory crankshaft pulley and timing sprocket connection\u003c\/li\u003e\n\u003cli\u003ePrecision-machined drilling fixture for accurate pin placement\u003c\/li\u003e\n\u003cli\u003eIntegrated 3\/8-inch square drive for improved tool clearance\u003c\/li\u003e\n\u003cli\u003eAlloy steel dowel pins for a secure interference fit\u003c\/li\u003e\n\u003cli\u003eSuitable for performance builds and engine upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKit Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) BenzForce precision-machined crankshaft drilling fixture\u003c\/li\u003e\n\u003cli\u003e(2) Alloy steel dowel pins — 5\/16\" diameter × 1-1\/2\" length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequired Tools (Not Included)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize N drill bit:** 0.302\" diameter, 4-3\/8\" overall length — McMaster-Carr #2901A157\u003c\/li\u003e\n\u003cli\u003e5\/16\" dowel pin reamer:** 0.3120\" diameter, high-speed steel — McMaster-Carr #3002A28\u003c\/li\u003e\n\u003cli\u003e3\/8\" drive ratchet or suitable driver\u003c\/li\u003e\n\u003cli\u003eCaliper or depth-measuring tool\u003c\/li\u003e\n\u003cli\u003eLight hammer for pin installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the crankshaft bolt\u003c\/strong\u003e. Leave the crankshaft pulley assembly installed and properly positioned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall the drilling fixture\u003c\/strong\u003e. Thread the BenzForce fixture into the crankshaft and snug it securely. Factory crankshaft bolt torque is not required for the fixture. Tighten only enough to prevent movement during drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill the pilot hole.\u003c\/strong\u003e Using the specified size N drill bit (0.302\"), drill through one of the fixture's guide holes. We recommend selecting a position opposite the factory Woodruff key.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify drilling depth.\u003c\/strong\u003e Measure the drilled hole using a caliper or depth gauge. The hole must extend at least 1.5\" from the pulley face. Drilling slightly deeper is recommended to provide adequate clearance for the dowel pin.  \u003cstrong\u003e\u003cspan style=\"color: rgb(167, 0, 0);\"\u003eImportant\u003c\/span\u003e\u003c\/strong\u003e: Insufficient hole depth can make removal of the installed pin extremely difficult. Correcting this condition may require removing the timing cover and using a puller to remove the timing sprocket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the drilling fixture\u003c\/strong\u003e. Carefully unthread and remove the fixture after drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReam the hole\u003c\/strong\u003e. Use the specified 0.3120\" reamer to finish the hole to its final diameter. Maintain proper alignment to ensure a consistent fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove debris\u003c\/strong\u003e.  Blow air into the hole to remove any metal shavings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall the dowel pin\u003c\/strong\u003e. Carefully insert the supplied alloy steel pin. Light tapping may be necessary due to the interference fit. Avoid excessive hammering that could deform or mushroom the pin.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eImportant Installation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\u003cli\u003eConfirm proper pulley alignment and drilling depth before installing the pin.\u003c\/li\u003e\n\u003cli\u003ePrevent metal chips from entering the engine or timing components.\u003c\/li\u003e\n\u003cli\u003eThe dowel pin is an interference-fit component and may be difficult to remove after installation.\u003c\/li\u003e\n\u003cli\u003eFollow factory specifications when reinstalling and tightening the crankshaft bolt.\u003c\/li\u003e\n\u003cli\u003eThis kit supplements the factory crankshaft connection; it does not replace proper crankshaft bolt clamping force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e**Application:** Mercedes-Benz OM606 and OM648 engines.\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":50980561256667,"sku":"BF697560622454","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/files\/20261029_093142.jpg?v=1793285503","url":"https:\/\/www.benzforce.com\/products\/crank-pin-kit-om606-om648","provider":"BenzForce","version":"1.0","type":"link"}