The BenzForce non-turbo reseller offering

BenzForce

Holset 79mm exhaust v-band to 3" tube adapter - HE200/HE221/HE250/HX30 Super/HX35/HE351

$49.00

This adapter fits the following turbos we carry: HE200, HE221, HE250, HE351, and HX35 We have seen people cut v-bands off of Holset turbos...

HE351/HX35 (74mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400

$39.00

This fits the following turbos we carry: HE250, HX30 Super, HX35, HE351, and HE400 Our BenzForce turbo v-band to 2.5" coupler adapters for the...

Gen II Oil Filter Housing Fittings - 10AN (Pair)

Quick View

BenzForce

Gen II Oil Filter Housing Fittings - 10AN (Pair)

$49.00

Are you performing an engine swap and looking for a need a solution to hook up an oil cooler? With our 10AN fittings, you...

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

Quick View

BenzForce

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

$49.00

Upgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line? Our 12AN drain is large enough...

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

Quick View

BenzForce

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

$29.00

This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35 and the HE400 Our extended drain tube clears the Holset...

HE221 (56mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221

$39.00

Our BenzForce turbo v-band to 2.5" coupler adapters for the compressor side of Holset turbos will save considerable time in fabrication! Made from 6061...

T25 to T3 Turbo Adapter - Stainless Steel

Quick View

BenzForce

T25 to T3 Turbo Adapter - Stainless Steel

$89.00

Having trouble adapting your T25 turbo to a T3 flange? We have heard your cries and come out with our T25 to T3 adapter...

Compressor Elbow Kit for Holset HE2xx - 56mm - HE200, HE221

Quick View

Cummins/DCEC

Compressor Elbow Kit for Holset HE2xx - 56mm - HE200, HE221

$42.00

Make the installation of your Holset, DCEC or Cummins HE221 easier with our HE221 compressor elbow kit. Our kit comes with a 90 degree...

om60x Turbo Oil Feed Kit - om602, om603, om606

Quick View

BenzForce

om60x Turbo Oil Feed Kit - om602, om603, om606

$52.00

End your struggles finding an odd block fitting and oil feed line for your om60x turbo swap; BenzForce has you covered! Our oil feed kit for...

Quick View

BenzForce

om606 Fuel Heater Block Off Plate

$29.00

This kit includes: Block off plate New gasket 4 x M6 stainless bolts and lock washers

Quick View

BenzForce

BenzForce Wastegate Bracket for Holset HE221

$32.00

Are you tired have trying to figure out how to clock your HE221? Our wastegate bracket eases the installation of the Holset HE221 in...

HX30 (65mm) compressor v-band to coupler adapter

Quick View

BenzForce

Compressor v-band to coupler adapter for Holset HX30 - 65mm

$39.00

This does not fit the HX30 Super. Our BenzForce turbo v-band to 2.5" coupler adapters for the compressor side of Holset turbos will save...

Quick View

BenzForce

BenzForce ALDA Cap

$28.00

This anodized aluminum ALDA cap was created to give SuperPump builds more appeal. It is perfect for Mercedes M pumps with an outside ALDA...

M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221

Quick View

BenzForce

M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221

$17.00

This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 1.68mm. This will fit the HE200 and HE221 Holset turbos...

HX30 Compressor Elbow Kit for Holset and Cummins Turbos

Quick View

Cummins/DCEC

Compressor Elbow Kit for Holset HX30 - 65mm

$42.00

This does not fit the HX30 Super Make the installation of your Holset, DCEC or Cummins HX30 easier with our HX30 compressor elbow kit. Our...

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

Quick View

BenzForce

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

$17.00

This fitting is manufactured exclusively for BenzForce. Made from stainless steel and restricted to 2mm. This will fit the T3 Holset turbos we sell....

12AN Oil Drain Tube for Holset T25 - HE200, HE221

Quick View

BenzForce

12AN Oil Drain Tube for Holset T25 - HE200, HE221

$29.00

Finding the odd-sized oil drain for the HE200 and HE221 can be a hassle. If you also consider the tight quarters of the core,...

-22%

Quick View

BenzForce

om617 Intake Manifold Adapter

$89.00 $69.00

UPS lost our package with the custom CNC wrenches. The product is marked down $20! Are you adding a HE221 or Holset T25 frame...

Quick View

BenzForce

3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

$29.00

This drain fits the following turbos we carry: HX30, HX30 Super, HE250, HE351, HX35, and the HE400 Our extended drain tube clears the Holset...

Quick View

BenzForce

om60x - 3/4" Barb to Block Turbo Drain Fitting (om602, om603, om606)

$49.00

Upgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line? Our 3/4" barb drain is large enough...

Quick View

Cummins/DCEC

T3 Turbo Gasket

$12.00

This is an open T3 turbo gasket that fits the HE351, HX35 and HX30 turbos listed on our site. The HX35 and HE351 are...

Quick View

Cummins/DCEC

Cummins/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221

$42.00

This four bolt flange fits the HE221 5.5cm2 and 7cm turbos we sell. The 7cm2 housing HE221 has a 5 bolt flange but this...

Sold out

Quick View

BenzForce

m112/m113 EGR Kit

$29.00

Our m112/m113 EGR Kits will keep your intake cleaner and keep the hot exhaust gas from robbing horsepower. This kit includes: Head block off...

Quick View

BenzForce

3/4" Barb Oil Drain Tube for Holset T25 - HE200, HE221

$29.00

Finding the odd-sized oil drain for the HE200 and HE221 can be a hassle. Our extended drain tube clears the HE221 compressor housing allowing...

Quick View

BenzForce

M10 to 4AN Turbo Feed Fitting

$5.75

This fitting eases the installation of the HE2xx (T25) turbos we sell. Fittings come with a crush washer. Inlet size: 4AN Outlet: M10 x...

Quick View

Cummins/DCEC

DCEC Turbine Outlet Gasket for Holset HE2xx - HE200, HE221

$10.99

This is the gasket for the vband flange adapter plate that mounts to the turbine side of the turbo

om617 HE221 (T25) Installation Kit for Holset Turbos - 12AN

Quick View

BenzForce

om617 HE221 (T25) Installation Kit for Holset Turbos - 12AN

$299.00

Mounting a Holset HE221 or other T25 frame turbo to your om617 can be a total pain in the ass but it doesn't have to...

Quick View

BenzForce

HX30 Super Oil Feed 4AN Restricted

$29.00

We found that our customers were having a tough time finding oil feed fittings for their new HX30 Super turbos that were reasonably priced,...

Quick View

BenzForce

T3 Spacer with extended studs

$49.00

When installing a T3 turbo on a factory exhaust manifold, it's common to run into clearance issues while trying to clock your turbo. Our...

Quick View

BenzForce

om617 3/4" Drain Tube

$29.00

Upgrading your turbo and need a better drain setup? Consider our 3/4" barb drain tube specifically designed for the om617. The tube includes a...

Exhaust Clamp for Holset Turbos - 79mm - HE200/HE221/HE250/HX30/HX30 Super/HX35/HE351/HE400

Quick View

Cummins/DCEC

Exhaust Clamp for Holset Turbos - 79mm - HE200/HE221/HE250/HX30/HX30 Super/HX35/HE351/HE400

$18.00

This clamp fits the exhaust housing on all the Holset turbos we sell. The exhaust v-band on our Holsets are 79mm. This clamp is...

Quick View

BenzForce

om606 (KKK) Turbo Exhaust Gasket

$15.00

These stainless gaskets are manufactured exclusively for BenzForce. No more exhaust leaks on your 606 factory manifold!

om60x Engine Mount Plates - om606, om613, om648

Quick View

BenzForce

om60x Engine Mount Plates - om606, om613, om648

$39.00

These 1/4" mild steel laser-cut plates will make swapping your om606 easy as pie. Hardware not included. Cut in Dallas TX

Quick View

BenzForce

om617 12AN Drain Tube

$29.00

Upgrading your turbo and need a better drain setup? Consider our 12AN drain tube specifically designed for the om617. The tube includes a new pan...

Quick View

Cummins/DCEC

T25 Turbo Gasket

$12.00

This is an open T25 turbo gasket that fits the HE221 listed on our site.

Quick View

BenzForce

M12 to 8MM Hose Barb Banjo Fitting

$19.00

Need a hose fitting for your fuel filter housing, BenzForce EDC fitting or om60x injection pump fuel inlet? Maybe the BenzForce 8mm hose barb...

Holset 79mm exhaust v-band to 3" tube adapter - HE200/HE221/HE250/HX30 Super/HX35/HE351

Compressor v-band to coupler adapter for Holset - 74mm - HE250/HX30/HX30 Super/HX35/HE351/HE400

Gen II Oil Filter Housing Fittings - 10AN (Pair)

om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)

12AN Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221

T25 to T3 Turbo Adapter - Stainless Steel

Compressor Elbow Kit for Holset HE2xx - 56mm - HE200, HE221

om60x Turbo Oil Feed Kit - om602, om603, om606

om606 Fuel Heater Block Off Plate

BenzForce Wastegate Bracket for Holset HE221

Compressor v-band to coupler adapter for Holset HX30 - 65mm

BenzForce ALDA Cap

M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221

Compressor Elbow Kit for Holset HX30 - 65mm

M12x1.5 to 4AN Turbo Feed Fitting - Restricted 2mm - HE250/HX30/HX35/HE351/HE400

12AN Oil Drain Tube for Holset T25 - HE200, HE221

om617 Intake Manifold Adapter

3/4" Barb Oil Drain Tube for Holset T3 - HE250/HX30/HX35/HE351/HE400

om60x - 3/4" Barb to Block Turbo Drain Fitting (om602, om603, om606)

T3 Turbo Gasket

Cummins/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221

m112/m113 EGR Kit

3/4" Barb Oil Drain Tube for Holset T25 - HE200, HE221

M10 to 4AN Turbo Feed Fitting

DCEC Turbine Outlet Gasket for Holset HE2xx - HE200, HE221

om617 HE221 (T25) Installation Kit for Holset Turbos - 12AN

HX30 Super Oil Feed 4AN Restricted

T3 Spacer with extended studs

om617 3/4" Drain Tube

Exhaust Clamp for Holset Turbos - 79mm - HE200/HE221/HE250/HX30/HX30 Super/HX35/HE351/HE400

om606 (KKK) Turbo Exhaust Gasket

om60x Engine Mount Plates - om606, om613, om648

om617 12AN Drain Tube

T25 Turbo Gasket

M12 to 8MM Hose Barb Banjo Fitting

Recently Viewed Products

Your cart

Popular Products

Customer Login

Recently Viewed Products

Your cart