{"title":"Engines","description":"","products":[{"product_id":"corteco-valve-stem-seal-kit-om606","title":"om606 - Valve Stem Seal Kit","description":"\u003cp\u003eCorteco Valve Stem Seal Kits are premium replacement parts designed to replace your original unit.  The om606 requires 3 kits\u003c\/p\u003e","brand":"Corteco","offers":[{"title":"Default Title","offer_id":31677417455693,"sku":"166-050-00-58","price":10.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/corteco-valve-stem-seals-2__41026.1510367496.1280.1280.png?v=1577047276"},{"product_id":"om603-om606-cylinder-head-bolt-10-x-102-mm-xzn-shoulder-bolt","title":"om603\/om606 - Cylinder Head Bolt, 10 X 102 mm XZN Shoulder Bolt","description":"\u003cp\u003eCylinder Head Bolt, (10 X 102 mm XZN Shoulder Bolt).  Quantities needed:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eom606: 20\u003c\/li\u003e\r\n\u003cli\u003eom605: 17\u003c\/li\u003e\r\n\u003cli\u003eom603: 13\u003c\/li\u003e\r\n\u003cli\u003eom602: 11\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677418274893,"sku":"603-990-02-10","price":1.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/head-bolt-603-990-02-10__20426.1505164339.1280.1280.png?v=1577047287"},{"product_id":"om603-om606-cylinder-head-bolt-10-x-115-mm-xzn-shoulder-bolt","title":"om603\/om606 - Cylinder Head Bolt, 10 X 115 mm XZN Shoulder Bolt","description":"\u003cp\u003eCylinder Head Bolt, (10 X 115 mm XZN Shoulder Bolt). Quantities needed:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eom606: 6\u003c\/li\u003e\r\n\u003cli\u003eom605: 5\u003c\/li\u003e\r\n\u003cli\u003eom603: 7\u003c\/li\u003e\r\n\u003cli\u003eom602: 6\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eDon't forget the XZN socket.\u003c\/span\u003e\u003c\/p\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677418340429,"sku":"603-990-03-10","price":2.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/head-bolt-603-990-02-10__83458.1505164546.1280.1280.png?v=1577047299"},{"product_id":"om603-om606-fuel-filter-spin-on-type","title":"om603\/om606 - Fuel Filter, (Spin-on Type)","description":"\u003cp\u003eMahle Fuel Filter, (Spin-on Type)\u003c\/p\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":31677418930253,"sku":"601-090-16-52","price":18.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/mahle-fuel-filter-4-601-090-16-52__65270.1510367520.1280.1280.jpg?v=1577047305"},{"product_id":"oil-pan-gasket-om606","title":"om606 - Oil Pan Gasket","description":"\u003cp\u003eom606 - Oil Pan Gasket\u003c\/p\u003e","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":31677419192397,"sku":"606-014-00-22","price":24.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/elring-oil-pan-1-606-014-00-22__04218.1505747715.1280.1280.jpg?v=1577047318"},{"product_id":"om606-water-pump-housing-gasket-housing-to-block","title":"om606 - Water Pump Housing Gasket - Housing to Block","description":"\u003cp\u003e\u003clabel\u003eOther Names:\u003c\/label\u003e \u003cspan class=\"list_value\"\u003eGasket\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003clabel\u003eDescription:\u003c\/label\u003e300SD \u0026amp; S350 diesel. 300D, E300 diesel.\u003c\/p\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677419389005,"sku":"606-201-01-80","price":3.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/victor-reinz-water-pump-housing-606-201-01-80__10873.1505746770.1280.1280.jpg?v=1577047328"},{"product_id":"om606-water-pump-gasket-bearing-housing-to-water-pump-housing","title":"om606 - Water Pump Gasket - Bearing Housing to Water Pump Housing","description":"\u003cp\u003e\u003clabel\u003eOther Names:\u003c\/label\u003e \u003cspan class=\"list_value\"\u003eGasket, Water Pump, Vl\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003clabel\u003eDescription:\u003c\/label\u003e 300SD \u0026amp; S350 diesel. 300D, E300 diesel.\u003c\/p\u003e\r\n\u003cp\u003e\u003clabel\u003eNotes:\u003c\/label\u003e \u003cspan class=\"list_value\"\u003eIncluded With Water Pump.\u003c\/span\u003e\u003c\/p\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677419683917,"sku":"601-201-03-80","price":1.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/victor-reinz-water-pump-gasket-601-201-03-80__84486.1505746876.1280.1280.jpg?v=1577047330"},{"product_id":"om606-thermostat-seal-o-ring","title":"om606 - Thermostat Seal - O-Ring","description":"\u003cp\u003e\u003clabel\u003eOther Names:\u003c\/label\u003e \u003cspan class=\"list_value\"\u003eGasket, Cooling Sys, V\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003clabel\u003eDescription:  \u003c\/label\u003eE300.\u003c\/p\u003e","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":31677419978829,"sku":"601-203-00-76","price":2.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/elring-thermostat-seal-1-601-203-00-76__67840.1505747204.1280.1280.png?v=1577047335"},{"product_id":"om606-seal-ring-water-pump-to-hard-line","title":"om606 - Seal Ring - Water Pump to Hard Line","description":"\u003cp\u003eSeal ring is item 197 in the parts diagram\u003c\/p\u003e","brand":"DPH","offers":[{"title":"Default Title","offer_id":31677420830797,"sku":"012-997-51-48","price":2.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/mb-pump-housing-to-line-012-997-51-48__42806.1505172500.1280.1280.jpg?v=1577047338"},{"product_id":"om606-mahle-oil-filter-kit","title":"om606 - Mahle Oil Filter Kit","description":"\u003cp\u003eom606 - Mahle Oil Filter Kit\u003c\/p\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":31677420863565,"sku":"606-180-01-09","price":18.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/mahle-oil-filter-1-606-180-01-09__78917.1505172801.1280.1280.jpg?v=1577047341"},{"product_id":"om606-injection-pump-o-ring-pump-to-crankcase","title":"Injection Pump O-Ring - om602, om603, om606","description":"\u003cp\u003eSeal Ring.Injct Pump - Mercedes-Benz (012-997-83-48)\u003c\/p\u003e","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":31677421060173,"sku":"012-997-83-48","price":2.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/dph-pump-seal-0129978348__86266.1505747000.1280.1280.jpg?v=1577047343"},{"product_id":"om606-oil-line-gasket-turbo-drain","title":"Oil Line Gasket (Turbo Drain) - om602, om603, om606","description":"\u003cp\u003eVendor varies between BenzForce and Mercedes-Benz based on availability. \u003c\/p\u003e\n\u003cp\u003e\u003clabel\u003ePositions:\u003c\/label\u003e \u003cspan class=\"list_value\"\u003eLower\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003clabel\u003eOther Names:\u003c\/label\u003e \u003cspan class=\"list_value\"\u003eGasket, Oil Line, Pipe\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003clabel\u003eDescription: \u003c\/label\u003eE300, lower. \u003cstrong\u003eThis is the drain tube to block!\u003c\/strong\u003e\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":31677421092941,"sku":"BF697560621723","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/turbo-drain-seal-603-187-06-80__03636.1505747108.1280.1280.png?v=1577047346"},{"product_id":"om603-om606-vacuum-pump-gasket","title":"Vacuum Pump Gasket - om602, om603, om606 (NA)","description":"\u003cp\u003eGasket - for Mercedes om606 NA (601-238-07-80)\u003c\/p\u003e\n\u003cp\u003eThis gasket is for the following applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1984-1989 190D\u003c\/li\u003e\n\u003cli\u003e1987 300D, 300TD\u003c\/li\u003e\n\u003cli\u003e1986-1987 300SDL\u003c\/li\u003e\n\u003cli\u003e1991 350SD\u003c\/li\u003e\n\u003cli\u003e1992-1993 300SD\u003c\/li\u003e\n\u003cli\u003e1994-1995 S350\u003c\/li\u003e\n\u003cli\u003e1995 E300\u003c\/li\u003e\n\u003cli\u003e1996-1997 E300D thru engine #013495, except cars with (code 807)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677421158477,"sku":"601-238-07-80","price":7.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/victor-reinz-vacuum-pump-gasket-601-238-07-80__36317.1505747312.1280.1280.jpg?v=1577047348"},{"product_id":"om606-gasket-oil-filter-vl-filter-housing-to-block","title":"Gasket, Oil Filter, Vl (Filter Housing to Block) - om602, om603, om606","description":"\u003cp\u003eGasket, Oil Filter, Vl - Mercedes-Benz (601-184-05-80)\u003c\/p\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677421289549,"sku":"601-184-05-80","price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/victor-reinz-601-184-05-80__03974.1505746932.1280.1280.jpg?v=1577047350"},{"product_id":"om606-cover-flywheel-inspection-hole","title":"Cover, Flywheel Inspection Hole - om602, om603, om606","description":"\u003cp\u003eCover, Flywheel Inspe - Mercedes-Benz (102-014-00-33)\u003c\/p\u003e","brand":"Trucktec","offers":[{"title":"Default Title","offer_id":31677421322317,"sku":"102-014-00-33","price":4.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/trucktec-flywheel-cover-102-014-00-33__05933.1510367499.1280.1280.jpg?v=1577047352"},{"product_id":"om606-seal-ring-crankshaft-front","title":"Seal Ring - Crankshaft, Front - om606","description":"Elring may be substituted for Corteco when Corteco is unavailable.","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":31677421355085,"sku":"023-997-84-47","price":14.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/corteco-front-seal-023-997-84-47__49843.1542985835.1280.1280.jpg?v=1577047355"},{"product_id":"om606-oil-level-sensor-o-ring-40-mm-od","title":"Oil Level Sensor O-Ring, (40 mm OD) - om606","description":"\u003cp\u003eSeal Ring.Engine.Vlr - Mercedes-Benz (015-997-39-48)\u003c\/p\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677421420621,"sku":"015-997-39-48","price":1.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/victor-reinz-015-997-39-48__71487.1505747145.1280.1280.jpg?v=1577047360"},{"product_id":"flywheel-bolt-10-x-1-x-28-5-mm","title":"Flywheel Bolt - 10 X 1 X 28.5 mm","description":"\u003cp\u003eFlywheel Bolt - 10 X 1 X 28.5 mm. om60x\u003c\/p\u003e","brand":"Mercedes-Benz","offers":[{"title":"Default Title","offer_id":31677422501965,"sku":"008-990-05-04","price":9.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/008-990-05-04-MBZ_2__21427.1511114941.1280.1280.jpg?v=1577047384"},{"product_id":"om606-rear-main-seal-retainer-and-seal-sprinter","title":"Rear Main Seal Retainer and Seal(Sprinter) - om606","description":"\u003cp\u003e\u003clabel\u003e\u003cspan\u003eThis Sprinter Van flange comes with a crankshaft seal installed and a guide for proper installation (minimizing damage to the seal)\u003c\/span\u003e\u003c\/label\u003e\u003c\/p\u003e","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":31677432791117,"sku":"050-738-87-AB","price":41.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/out2__05600.1549240479.1280.1280.jpg?v=1577047603"},{"product_id":"om606-turbo-piston-npr-europe","title":"Turbo Piston (NPR Europe) - om606","description":"\u003cp\u003eAftermarket replacement for om605\/om606 turbo pistons. These are STANDARD SIZE (87mm). NPR of Europe GmbH part number 130 010 0006 00.\u003c\/p\u003e\n\u003cp\u003ePer the manufacturer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePiston with wrist pin and rings\u003c\/li\u003e\n\u003cli\u003ePiston head\/crown is anodized\u003c\/li\u003e\n\u003cli\u003eSides are graphite coated\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NPR of Europe GmbH","offers":[{"title":"Default Title","offer_id":31677433315405,"sku":"605-030-04-17","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20190301_150227__69086.1551476397.1280.1280.jpg?v=1577047619"},{"product_id":"om606-vacuum-pump-to-crankcase","title":"Vacuum Pump to Crankcase - om606 Turbo","description":"\u003cp\u003e\u003cspan\u003eVacuum Pump Gasket - Vacuum Pump to Timing Case\u003c\/span\u003e (\u003cspan\u003e604-238-00-80\u003c\/span\u003e)\u003c\/p\u003e\n\u003cp\u003eThis gasket is for the following applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1996-1997 E300D from engine #013496, including cars with (code 807)\u003c\/li\u003e\n\u003cli\u003e1998-1999 E300TD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":31677437608013,"sku":"604-238-00-80","price":11.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/606-vacuum-gasket__91159.1558033121.1280.1280.jpg?v=1577047871"},{"product_id":"om606-piston-ring-set-87mm","title":"Piston Ring Set 87mm (STANDARD) - om606","description":"\u003cul\u003e\n\u003cli\u003eSold per cylinder\u003c\/li\u003e\n\u003cli\u003eOM602, OM603, OM605, OM606 ring set\u003c\/li\u003e\n\u003cli\u003e87.00mm\u003c\/li\u003e\n\u003cli\u003eBrand: NPR Europe.\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number 8910480000 \/ 120010002300\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NPR of Europe GmbH","offers":[{"title":"Default Title","offer_id":31677437673549,"sku":"120010002300","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20190521_124722__74101.1558461131.1280.1280.jpg?v=1577047889"},{"product_id":"om606-fuel-injector-seal","title":"Fuel Injector Seal - om606","description":"","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":31677445013581,"sku":"606-016-02-21","price":2.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/606-016-02-21-MBZ__92941.1576463721.1280.1280.jpg?v=1577048435"},{"product_id":"om606-npr-main-bearing-set-58-00-mm-standard","title":"Main Bearing Set, Std. - om606","description":"\u003cp\u003eMain bearing\u003cspan\u003e set - \u003c\/span\u003e\u003cstrong\u003eSTANDARD SIZE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlSn20Cu, SAE 783 coating [SAL]\u003c\/li\u003e\n\u003cli\u003eSold per 6-cylinder engine (set)\u003c\/li\u003e\n\u003cli\u003eMfg part number: \u003cspan data-mce-fragment=\"1\"\u003e180 010 0005 00\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlt part number: \u003cspan data-mce-fragment=\"1\"\u003e6010120000\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNPR offers a range of materials including two- and three-material bearings, lead-free bearing materials, and tread coatings, such as sputter, polymer (Nefrox), and galvanic coatings (Cerrox).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur plain bearings are characterized by a high load capacity and wear resistance. They have excellent embeddability and adaptability.\u003c\/p\u003e","brand":"NPR of Europe GmbH","offers":[{"title":"Default Title","offer_id":31752431468621,"sku":"180010000500","price":43.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/IMG_0260-2.jpg?v=1578352808"},{"product_id":"om606-exhaust-manifold-gasket","title":"Exhaust Manifold Gasket - om606","description":"Exhaust Manifold Gasket","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":32309464137805,"sku":"606-142-04-80","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/6061420480.jpg?v=1587302551"},{"product_id":"om606-intake-manifold-gasket","title":"Intake Manifold Gasket - om606","description":"Intake Manifold Gasket","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":32309479014477,"sku":"606-141-01-80","price":15.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/713180300.jpg?v=1587302860"},{"product_id":"om606-glow-plug-12-mm","title":"Glow Plug (12 mm) - om606","description":"\u003cdiv ng-show=\"a.StartYear != a.EndYear\"\u003e1996 - 1999 E300\u003c\/div\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":32727658168397,"sku":"001-159-20-01","price":19.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/001-159-20-01-M14.jpg?v=1593215928"},{"product_id":"om606-diesel-fuel-thermostat-gasket","title":"Diesel Fuel Thermostat Gasket - om606","description":"Diesel Fuel Thermostat Gasket.  Brand may be Victor Reinz or BenzForce depending on availability","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":32860026306637,"sku":"604-078-01-80","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/604-078-01-80-M17.jpg?v=1595425666"},{"product_id":"om617-12an-drain-tube","title":"12AN Drain Tube - om617","description":"\u003cp\u003eUpgrading your turbo and need a better drain setup?  Consider our 12AN drain tube specifically designed for the om617.  The tube includes a new pan grommet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6061 aluminum pan fitting\u003c\/li\u003e\n\u003cli\u003ePan end matches factory dimensions\u003c\/li\u003e\n\u003cli\u003eNew pan grommet included\u003c\/li\u003e\n\u003cli\u003e12AN fitting for oil drain line\u003c\/li\u003e\n\u003cli\u003eAnodized flat black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":32879995322445,"sku":"BF697560621105","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/617-pan-drain-2.png?v=1599618538"},{"product_id":"om606-12an-to-block-turbo-drain-fitting","title":"12AN to Block Turbo Drain Fitting - om602, om603, om606","description":"\u003cp\u003eUpgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line?  Our 12AN drain is large enough to reduce restrictions found in the usual 10AN drains and eliminate the need to custom fabricate your own return fitting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom 12AN to om606 block fitting\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect (factory) return angle\u003c\/li\u003e\n\u003cli\u003eAnodized flat black\u003c\/li\u003e\n\u003cli\u003e6061 Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e2 - M6 x16 stainless cap screws\u003c\/li\u003e\n\u003cli\u003eTurbo drain gasket (603-187-06-80)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #830505;\"\u003eWhen using in tight quarters, such as the HE221 on a stock manifold, 60 degree fittings may be required.  This fitting was designed with the factory angle.\u003c\/span\u003e\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":33018166313037,"sku":"BF697560621112","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20200908-IMG_1617.png?v=1599617630"},{"product_id":"kkk-to-t25-turbo-adapter","title":"om606 (KKK) to T25 Turbo Adapter - HE200, HE221","description":"\u003cp\u003eHaving trouble adapting your T25 turbo to your om606 manifold?  We have heard your cries and come out with our T25 to KKK adapter to ease your setup.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x T25 gasket\u003c\/li\u003e\n\u003cli\u003e7 x M8 x 1.25 x 35mm studs\u003c\/li\u003e\n\u003cli\u003e7 x M8 x 1.25 copper exhaust nuts\u003c\/li\u003e\n\u003cli\u003e21mm thick\u003c\/li\u003e\n\u003cli\u003eMachined from 1018\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":33028639850573,"sku":"BF684417820248","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/kkk-t25-3.png?v=1599856887"},{"product_id":"om606-he221-t25-installation-kit-for-holset-turbos","title":"om606 HE221 (T25) Installation Kit for Holset Turbos - 12AN","description":"\u003cp data-mce-fragment=\"1\"\u003eMounting a Holset HE221 or other T25 frame turbo to your om606 can be a difficult task.  Well no more!  The BenzForce HE221 for om606 Kit takes the headache out of the physical connections.  All that is needed is a 4AN feed line and a 12AN drain hose.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e** Turbo not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHere is what is included: \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-wastegate-bracket\" title=\"BenzForce Wastegate Bracket for Holset HE221\" target=\"_blank\"\u003eHE221 Wastegate Bracket Kit\u003c\/a\u003e (with gasket and nuts). This bracket was engineered to have the proper wastegate preload. Instructions are below\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-79mm-exhaust-v-band-to-3-tube-adapter\" title='Holset 79mm exhaust v-band to 3\" tube adapter - HE200\/HE221\/HE250\/HX30 Super\/HX35\/HE351\/HE400' target=\"_blank\"\u003e79mm exhaust v-band to 3\" tube adapter\u003c\/a\u003e for Holset turbos (adapter + clamp)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-12an-drain-tube\" title=\"12AN Oil Drain Tube for Holset T25 - HE200, HE221\" target=\"_blank\"\u003e12AN Drain Tube kit\u003c\/a\u003e (screws, gasket, and drain)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-56mm-compressor-v-band-to-coupler-adapter\" title=\"Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221\" target=\"_blank\"\u003eHE221 (56mm) compressor v-band to coupler adapter\u003c\/a\u003e (with clamp and o-ring)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/om606-12an-to-block-turbo-drain-fitting\" title=\"om60x - 12AN to Block Turbo Drain Fitting (om602, om603, om606)\" target=\"_blank\"\u003eom60x - 12AN to Block Turbo Drain Fitting\u003c\/a\u003e (with gasket and bolts).  T\u003cspan data-mce-fragment=\"1\"\u003ehe HE221 on a stock manifold presents a very tight angle.  60-degree fittings may be required as this fitting was designed with the factory drain angle.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/kkk-to-t25-turbo-adapter\" title=\"KKK to T25 Turbo Adapter - HE200, HE221\" target=\"_blank\"\u003eKKK to T25 Turbo Adapter kit\u003c\/a\u003e (with studs, nuts, and gaskets)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDCEC T25 manifold gaskets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHE221 \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-he221-turbine-flange-kit\" title=\"Click to zoom in Cummins\/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221\" target=\"_blank\"\u003eTurbine Flange Kit - 4 bolt\u003c\/a\u003e (with bolts and gasket)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOur BenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/m10-to-4an-turbo-feed-fitting-restricted\" title=\"M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm\" target=\"_blank\"\u003eM10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWastegate Installation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate hose\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate actuator\u003c\/strong\u003e. After pulling the internal pin allowing the compressor housing to rotate independently, just remove to cotter pin on the wastegate (or a C-clip on the 5.5 cm2 models) and the two bolts holding the wastegate on the turbo.  This will allow you to completely remove the wastegate.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMount the bracket\u003c\/strong\u003e.  Remove the turbo from the T25 flange.  Place, or replace, a new T25 gasket on the flange.  Then install the wastegate bracket, followed by another T25 gasket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall the turbo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReinstall the actuator\u003c\/strong\u003e.  Rotate the actuator 180 degrees from its original position.   Put the end over the pin on the turbine housing and install the original cotter pin or c-clip.  Then pull the actuator and insert the original two bolts through the bracket and through the stock actuator bracket.  The actuator comes pre-loaded from the factory so pulling the actuator should put the same amount of tension on the actuator as the original configuration.  Use the included copper exhaust nuts to secure the actuator to the BenzForce bracket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eInstall boost hose\u003c\/strong\u003e.  Depending on how the turbo is clocked, you can either reuse the existing boost hose or you may require a new one.  Regardless, reinstall the hose so the actuator will see boost from the compressor housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNote that the HE221 has clocking pins inside the turbo.  Both the compressor and turbine housings pins will need to be removed in order to rotate the core\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":33228948799565,"sku":"BF697560621129","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/benzforce-he221-kit-for-om606.jpg?v=1599864853"},{"product_id":"om617-he221-t25-installation-kit-for-holset-turbos","title":"om617 12AN Installation Kit for Holset Turbos - HE200, HE221","description":"\u003cp data-mce-fragment=\"1\"\u003eMounting a Holset HE221 or other T25 frame turbo to your om617 can be a total pain in the ass but it doesn't have to be!  The BenzForce HE221 Installation Kit for the om617 takes the headache out of the physical connections.  All that is needed is a 4AN feed line and a 12AN drain hose. \u003cspan style=\"text-decoration: underline;\"\u003ePlease note that this kit does not connect directly to the intake manifold - there is an offset.  The main intent is to be used in injunction with our\u003cspan style=\"color: #b70505;\"\u003e\u003ca style=\"color: #b70505; text-decoration: underline;\" title=\"om617 Intake Manifold Adapter\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/om617-intake-manifold-adapter\"\u003e intake manifold adapter\u003c\/a\u003e\u003c\/span\u003e to route your compressed air through an intercooler.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e** Turbo not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHere is what is included: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca title=\"BenzForce Wastegate Bracket for Holset HE221\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-wastegate-bracket\" target=\"_blank\"\u003eHE221 Wastegate Bracket Kit \u003c\/a\u003e(with gasket and nuts). This bracket was engineered to have the proper wastegate preload. Instructions are below\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca title='Holset 79mm exhaust v-band to 3\" tube adapter - HE200\/HE221\/HE250\/HX30 Super\/HX35\/HE351\/HE400' href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-79mm-exhaust-v-band-to-3-tube-adapter\" target=\"_blank\"\u003e79mm exhaust v-band to 3\" tube adapter\u003c\/a\u003e for Holset turbos (adapter + clamp)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca title=\"12AN Oil Drain Tube for Holset T25 - HE200, HE221\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-12an-drain-tube\" target=\"_blank\"\u003e12AN Drain Tube kit\u003c\/a\u003e (screws, gasket, and drain)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca title=\"Click to zoom in Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-56mm-compressor-v-band-to-coupler-adapter\" target=\"_blank\"\u003eHE221 (56mm) compressor v-band to coupler adapter\u003c\/a\u003e (with clamp and o-ring)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca title=\"om617 12AN Drain Tube\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/om617-12an-drain-tube\" target=\"_blank\"\u003eom617 - 12AN to oil pan turbo drain fitting\u003c\/a\u003e (with grommet)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca title=\"T25 to T3 Turbo Adapter\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/t25-to-t3-turbo-adapter\"\u003eT3 to T25 Turbo Adapter kit\u003c\/a\u003e designed specifically for the om617 (with bolts, nuts, and gaskets).  This adapter uses bolts to mount to the manifold and studs on the turbo side which is difficult to find in the aftermarket\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDCEC T25 manifold gaskets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHE221 \u003ca title=\"Cummins\/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-he221-turbine-flange-kit\" target=\"_blank\"\u003eTurbine Flange Kit - 4 bolt \u003c\/a\u003e(with bolts and gasket)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003ca title=\"M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221\" href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/m10-to-4an-turbo-feed-fitting-restricted\" target=\"_blank\"\u003eM10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm\u003c\/a\u003e - Check your engine's oil pressure.  If your engine is within the Holset requirements and would like an open fitting, please let us know in the order comments. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWastegate Installation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate hose\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate actuator\u003c\/strong\u003e. After pulling the internal pin allowing the compressor housing to rotate independently, just remove to cotter pin on the wastegate (or a C-clip on the 5.5 cm2 models) and the two bolts holding the wastegate on the turbo.  This will allow you to completely remove the wastegate.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMount the bracket\u003c\/strong\u003e.  Remove the turbo from the T25 flange.  Place, or replace, a new T25 gasket on the flange.  Then install the wastegate bracket, followed by another T25 gasket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall the turbo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReinstall the actuator\u003c\/strong\u003e.  Rotate the actuator 180 degrees from its original position.   Put the end over the pin on the turbine housing and install the original cotter pin or c-clip.  Then pull the actuator and insert the original two bolts through the bracket and through the stock actuator bracket.  The actuator comes pre-loaded from the factory so pulling the actuator should put the same amount of tension on the actuator as the original configuration.  Use the included copper exhaust nuts to secure the actuator to the BenzForce bracket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eInstall boost hose\u003c\/strong\u003e.  Depending on how the turbo is clocked, you can either reuse the existing boost hose or you may require a new one.  Regardless, reinstall the hose so the actuator will see boost from the compressor housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNote that the HE221 has clocking pins inside the turbo.  Both the compressor and turbine housings pins will need to be removed in order to rotate the core\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe HE221 must have at least 30 degrees angle off the horizontal which is about the perfect setup after clocking the core for the drain to clear the wastegate.  With 2 x 60 degree 12AN fittings, you can build the perfect drain hose!  Getting the threads started on the fittings may take some muscles but it will look absolutely awesome!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOn the w123 chassis, the engine support mount may be in the way.  We have seen at least two suspension types so please look at the last picture to determine if that will meet your needs before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/files\/20220628_130201_480x480.jpg?v=1656464771\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/files\/291041885_3129902740593420_6045197748847105929_n_480x480.jpg?v=1656679438\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":33228949618765,"sku":"BF697560621136","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/om617-he221-kit-2.png?v=1599866765"},{"product_id":"om606-valve-cover-gasket-kit-elring","title":"Valve Cover Gasket Kit (Elring) - om606","description":"\u003cp\u003e\u003cstrong\u003eThis brand is the valve cover gasket only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInjector seals are part 606-016-02-21\u003c\/p\u003e","brand":"Elring Klinger","offers":[{"title":"Default Title","offer_id":33057510948941,"sku":"606-016-04-21","price":27.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/s-l640.jpg?v=1600815963"},{"product_id":"om606-turbo-head-gasket-set-victor-reinz","title":"Turbo Head Gasket Set - om606","description":"\u003cp\u003eNotes: Does not include Valve Stem Seals or Valve Cover Gasket.\u003c\/p\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":33349065375821,"sku":"606-010-46-20","price":229.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/elring-head-gasket-606-010-46-20__22206.1505161438.1280.1280_9c46f3e9-a59d-499c-8559-ecccb3d271cb.png?v=1614122930"},{"product_id":"om617-mw-pump-top-plate","title":"om617 MW Pump top plate","description":"\u003cp data-mce-fragment=\"1\"\u003eWe've had customers want to jazz up their pumps and also some that have suffered from shipping damages on their pumps.  Whatever the case, you will be sporting your pump in style with the BenzForce top plate.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease note that this plate does NOT have the means to mount the factory automatic transmission valve\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1 x BenzForce top plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 x Stainless bolts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 x Stainless lock washers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGasket NOT included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstallation can be tricky - if more detailed instructions are required please email us.  These are general installation steps:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRemove the ALDA hose\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnscrew the ADALA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRemove the four slotted screws from the top corners of the plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe shaft from the ALDA is held on with a small C clip that keeps tension on a washer and spring.  Carefully remove that C clip.  If care is not taken, it can be propelled off the shaft from the tension of the spring and a replacement part will be very difficult to find.  Set the c-clip, spring, and most likely washer aside.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRemove the top plate off the ADLDA shaft being careful not to allow the shaft to slip inside the pump\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUsing a hex bit, remove the ALDA fitting and thread it into the new cap.  These are aluminum parts so do not over tighten.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect the ALDA shift through the ADLA fitting and place the new top cover back onto the pump, securing it with the new cap screws and lock washers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlip the spring and regular washer over the ALDA shaft\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUse SOFT JAWED pliers to pull up on the ALDA shaft while securing the c-clip.  Do not mar the surface of the shaft as it may prevent proper function due to binding\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eResecure the ALDA and the ADLA hose\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnjoy your cool new look - great job!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade by BenzForce, LLC\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39368107556941,"sku":"BF697560621198","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/0125_1_002_540x_a6a33a8b-41b3-46a0-977f-eb985ca51317.jpg?v=1623944182"},{"product_id":"om606-engine-mount-plates","title":"Engine Mount Plates - om602, om603, om606, om613, om648","description":"\u003cp\u003eThese 1\/4\" mild steel laser-cut plates will make swapping your om60x\/om648 easy as pie.  Hardware not included.\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39378388680781,"sku":"BF697560621228","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20210628-20210628_151622.jpg?v=1741540305"},{"product_id":"om606-fuel-heater-block-off-plate","title":"Fuel Heater Block Off Plate - om606","description":"\u003cp\u003eThis kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlock off plate\u003c\/li\u003e\n\u003cli\u003eNew gasket\u003c\/li\u003e\n\u003cli\u003e4 x M6 stainless bolts and lock washers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39382249406541,"sku":"BF697560621235","price":31.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20210702-20210702_134206.jpg?v=1625252590"},{"product_id":"om60x-3-4-barb-to-block-turbo-drain-fitting-om602-om603-om606","title":"3\/4\" Barb to Block Turbo Drain Fitting - om602, om603, om606","description":"\u003cp\u003eUpgrading the turbo on the om606 and looking for an easy way to mount the turbo drain line?  Our 3\/4\" barb drain is large enough to reduce restrictions found in the usual 10AN drains and eliminate the need to custom fabricate your own return fitting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom barb to om606 block fitting\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect (factory) return angle\u003c\/li\u003e\n\u003cli\u003eAnodized flat black\u003c\/li\u003e\n\u003cli\u003e6061 Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e2 - M6 x16 stainless cap screws\u003c\/li\u003e\n\u003cli\u003eTurbo drain gasket (603-187-06-80)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese fittings are custom manufactured exclusively for BenzForce and offer a superior design  When compared to a simple flared tube offered by other vendors as our multiple barb design with a sharp barb angle offers more surface area to ensure a proper seal.\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39463663697997,"sku":"BF697560621266","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20210911-IMG_2077.jpg?v=1631372785"},{"product_id":"om617-3-4-drain-tube","title":"om617 3\/4\" Drain Tube","description":"\u003cp\u003eUpgrading your turbo and need a better drain setup?  Consider our 3\/4\" barb drain tube specifically designed for the om617.  The tube includes a new pan grommet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6061 aluminum pan fitting\u003c\/li\u003e\n\u003cli\u003ePan end matches factory dimensions\u003c\/li\u003e\n\u003cli\u003eNew pan grommet included\u003c\/li\u003e\n\u003cli\u003e3\/4\" barb fitting for oil drain line\u003c\/li\u003e\n\u003cli\u003eAnodized flat black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cspan data-mce-fragment=\"1\"\u003eThese fittings are custom manufactured exclusively for BenzForce and offer a superior design  When compared to a simple flared tube offered by other vendors as our multiple barb design with a sharp barb angle offers more surface area to ensure a proper seal.\u003c\/span\u003e\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39463679950925,"sku":"BF697560621273","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20210911-IMG_2085.jpg?v=1631376465"},{"product_id":"om606-kkk-gasket","title":"om606 (KKK) Turbo Exhaust Gasket","description":"\u003cp\u003eThese copper gaskets are manufactured exclusively for BenzForce.  No more exhaust leaks on your 606 factory manifold!\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39463760789581,"sku":"BF697560621280","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/files\/rn-image_picker_lib_temp_de251bcf-1fc2-4fdc-948f-e542b3d81b92.jpg?v=1720272064"},{"product_id":"m112-egr-kit","title":"Exhaust Gas Recirculation (EGR) Kit - m112, m113","description":"\u003cp\u003eOur m112\/m113 EGR Kits will keep your intake cleaner and keep the hot exhaust gas from robbing horsepower.  This kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHead block off plate\u003c\/li\u003e\n\u003cli\u003eIntake block off plate\u003c\/li\u003e\n\u003cli\u003eEGR Line Gasket - to Intake Manifold 112 141 21 80\u003c\/li\u003e\n\u003cli\u003eEGR Valve Gasket 112 142 02 80\u003c\/li\u003e\n\u003cli\u003eStainless bolts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIMPORTANT NOTE:  we are supplying this kit because we have several folks using these engines for off-highway use.  PLEASE note that the EPA is defining a racecar as the following:  \"Any racecar that has a VIN plate, installed at the factory, can no longer be out of compliance under this proposed rule. This applies to racecars used strictly at drag strips, oval tracks, and other types of racing, with no intention of ever seeing the open road again.\"  We do not support removing or tampering with emissions devices or in factory vehicles.  More information can be found at: \u003ca href=\"https:\/\/www.govinfo.gov\/content\/pkg\/CHRG-114hhrg20835\/html\/CHRG-114hhrg20835.htm\"\u003ehttps:\/\/www.govinfo.gov\/content\/pkg\/CHRG-114hhrg20835\/html\/CHRG-114hhrg20835.htm\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39463845199949,"sku":"BF697560621297","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/files\/rn-image_picker_lib_temp_0e012e58-82ea-408a-b8ef-aa9a2b59cb56.jpg?v=1741536794"},{"product_id":"mahle-thermostat-80-deg-c","title":"MAHLE Thermostat (80 deg. C)","description":"\u003cp\u003eThermostat (80 deg. C)\u003c\/p\u003e\n\u003cp\u003eYear Model\u003cbr\u003e1987 190D 2.5 Turbo \u003cbr\u003e1987 300D \u003cbr\u003e1990 300D \u003cbr\u003e1991 300D \u003cbr\u003e1992 300D \u003cbr\u003e1993 300D \u003cbr\u003e1992 300SD \u003cbr\u003e1993 300SD \u003cbr\u003e1986 300SDL \u003cbr\u003e1987 300SDL \u003cbr\u003e1987 300TD \u003cbr\u003e1991 350SD \u003cbr\u003e1990 350SDL\u003cbr\u003e1991 350SDL\u003cbr\u003e1998 E300\u003cbr\u003e1999 E300\u003cbr\u003e1994 S350\u003cbr\u003e1995 S350\u003c\/p\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":39488496697421,"sku":"602-200-00-15M","price":26.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/602-200-00-15-2.jpg?v=1633102343"},{"product_id":"om606-he221-t25-installation-kit-for-holset-turbos-barb-fittings","title":"om606 HE221 (T25) Installation Kit for Holset Turbos - Barb Fittings","description":"\u003cp data-mce-fragment=\"1\"\u003eMounting a Holset HE221 or other T25 frame turbo to your om606 can be a difficult task.  Well no more!  The BenzForce HE221 for om606 Kit takes the headache out of the physical connections.  All that is needed is a 4AN feed line and a 3\/4\" drain hose.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e** Turbo not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHere is what is included: \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-wastegate-bracket\" title=\"BenzForce Wastegate Bracket for Holset HE221\" target=\"_blank\"\u003eHE221 Wastegate Bracket Kit\u003c\/a\u003e (with gasket and nuts). This bracket was engineered to have the proper wastegate preload. Instructions are below\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-79mm-exhaust-v-band-to-3-tube-adapter\" title='Holset 79mm exhaust v-band to 3\" tube adapter - HE200\/HE221\/HE250\/HX30 Super\/HX35\/HE351\/HE400' target=\"_blank\"\u003e79mm exhaust v-band to 3\" tube adapter\u003c\/a\u003e for Holset turbos (adapter + clamp)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/barb-oil-drain-tube-for-holset-t25-he200-he221\" target=\"_blank\"\u003e3\/4\" Barb Oil Drain Tube for Holset T25\u003c\/a\u003e (screws, gasket, and drain)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-56mm-compressor-v-band-to-coupler-adapter\" title=\"Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221\" target=\"_blank\"\u003eHE221 (56mm) compressor v-band to coupler adapter\u003c\/a\u003e (with clamp and o-ring)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/om606\/products\/om60x-3-4-barb-to-block-turbo-drain-fitting-om602-om603-om606\" target=\"_blank\"\u003eom60x - 3\/4\" Barb to Block Turbo Drain Fitting\u003c\/a\u003e (with gasket and bolts).  \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/kkk-to-t25-turbo-adapter\" title=\"KKK to T25 Turbo Adapter - HE200, HE221\" target=\"_blank\"\u003eKKK to T25 Turbo Adapter kit\u003c\/a\u003e (with studs, nuts, and gaskets)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDCEC T25 manifold gaskets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHE221 \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-he221-turbine-flange-kit\" title=\"Click to zoom in Cummins\/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221\" target=\"_blank\"\u003eTurbine Flange Kit - 4 bolt\u003c\/a\u003e (with bolts and gasket)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOur BenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/m10-to-4an-turbo-feed-fitting-restricted\" title=\"M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm\" target=\"_blank\"\u003eM10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWastegate Installation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate hose\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate actuator\u003c\/strong\u003e. After pulling the internal pin allowing the compressor housing to rotate independently, just remove to cotter pin on the wastegate (or a C-clip on the 5.5 cm2 models) and the two bolts holding the wastegate on the turbo.  This will allow you to completely remove the wastegate.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMount the bracket\u003c\/strong\u003e.  Remove the turbo from the T25 flange.  Place, or replace, a new T25 gasket on the flange.  Then install the wastegate bracket, followed by another T25 gasket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall the turbo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReinstall the actuator\u003c\/strong\u003e.  Rotate the actuator 180 degrees from its original position.   Put the end over the pin on the turbine housing and install the original cotter pin or c-clip.  Then pull the actuator and insert the original two bolts through the bracket and through the stock actuator bracket.  The actuator comes pre-loaded from the factory so pulling the actuator should put the same amount of tension on the actuator as the original configuration.  Use the included copper exhaust nuts to secure the actuator to the BenzForce bracket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eInstall boost hose\u003c\/strong\u003e.  Depending on how the turbo is clocked, you can either reuse the existing boost hose or you may require a new one.  Regardless, reinstall the hose so the actuator will see boost from the compressor housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e Note that the HE221 has clocking pins inside the turbo.  Both the compressor and turbine housings pins will need to be removed in order to rotate the core\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39521714372685,"sku":"BF697560621310","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/IMG_0418_1024x1024_e3ab746b-41f9-4967-98aa-5f5b2109c8a5.png?v=1635606646"},{"product_id":"om617-he221-t25-installation-kit-for-holset-turbos-barb-fittings","title":"om617 Barb Installation Kit for Holset Turbos - HE200, HE221","description":"\u003cp data-mce-fragment=\"1\"\u003eMounting a Holset HE221 or other T25 frame turbo to your om617 can be a total pain in the ass but it doesn't have to be!  The BenzForce HE221 Installation Kit for the om617 takes the headache out of the physical connections.  All that is needed is a 4AN feed line and a 3\/4\" drain hose. \u003cspan style=\"text-decoration: underline;\"\u003ePlease note that this kit does not connect directly to the intake manifold - there is an offset.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e** Turbo not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHere is what is included: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-wastegate-bracket\" title=\"BenzForce Wastegate Bracket for Holset HE221\" target=\"_blank\"\u003eHE221 Wastegate Bracket Kit \u003c\/a\u003e(with gasket and nuts). This bracket was engineered to have the proper wastegate preload. Instructions are below\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-79mm-exhaust-v-band-to-3-tube-adapter\" title='Holset 79mm exhaust v-band to 3\" tube adapter - HE200\/HE221\/HE250\/HX30 Super\/HX35\/HE351\/HE400' target=\"_blank\"\u003e79mm exhaust v-band to 3\" tube adapter\u003c\/a\u003e for Holset turbos (adapter + clamp)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/barb-oil-drain-tube-for-holset-t25-he200-he221\" target=\"_blank\"\u003e3\/4\" Barb Oil Drain Tube for Holset T25\u003c\/a\u003e (screws, gasket, and drain)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/he221-56mm-compressor-v-band-to-coupler-adapter\" title=\"Click to zoom in Compressor v-band to coupler adapter for Holset HE2xx - 56mm - HE200, HE221\" target=\"_blank\"\u003eHE221 (56mm) compressor v-band to coupler adapter\u003c\/a\u003e (with clamp and o-ring)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/om617\/products\/om617-3-4-drain-tube\" target=\"_blank\"\u003eom617 3\/4\" Drain Tube \u003c\/a\u003e(with grommet)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBenzForce \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/t25-to-t3-turbo-adapter\" title=\"T25 to T3 Turbo Adapter\"\u003eT3 to T25 Turbo Adapter kit\u003c\/a\u003e designed specifically for the om617 (with bolts, nuts, and gaskets).  This adapter uses bolts to mount to the manifold and studs on the turbo side which is difficult to find in the aftermarket\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDCEC T25 manifold gaskets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHE221 \u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/holset-he221-turbine-flange-kit\" title=\"Cummins\/DCEC 4-Bolt Turbine Flange Kit for Holset HE2xx - HE200, HE221\" target=\"_blank\"\u003eTurbine Flange Kit - 4 bolt \u003c\/a\u003e(with bolts and gasket)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003ca href=\"https:\/\/www.benzforce.com\/collections\/holset-he221-and-parts\/products\/m10-to-4an-turbo-feed-fitting-restricted\" title=\"M10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm - HE200, HE221\" target=\"_blank\"\u003eM10x1.25 to 4AN Turbo Feed Fitting - Restricted 1.68mm\u003c\/a\u003e - Check your engine's oil pressure.  If your engine is within the Holset requirements and would like an open fitting, please let us know in the order comments. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWastegate Installation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate hose\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRemove the wastegate actuator\u003c\/strong\u003e. After pulling the internal pin allowing the compressor housing to rotate independently, just remove to cotter pin on the wastegate (or a C-clip on the 5.5 cm2 models) and the two bolts holding the wastegate on the turbo.  This will allow you to completely remove the wastegate.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMount the bracket\u003c\/strong\u003e.  Remove the turbo from the T25 flange.  Place, or replace, a new T25 gasket on the flange.  Then install the wastegate bracket, followed by another T25 gasket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall the turbo\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eReinstall the actuator\u003c\/strong\u003e.  Rotate the actuator 180 degrees from its original position.   Put the end over the pin on the turbine housing and install the original cotter pin or c-clip.  Then pull the actuator and insert the original two bolts through the bracket and through the stock actuator bracket.  The actuator comes pre-loaded from the factory so pulling the actuator should put the same amount of tension on the actuator as the original configuration.  Use the included copper exhaust nuts to secure the actuator to the BenzForce bracket.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eInstall boost hose\u003c\/strong\u003e.  Depending on how the turbo is clocked, you can either reuse the existing boost hose or you may require a new one.  Regardless, reinstall the hose so the actuator will see boost from the compressor housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNote that the HE221 has clocking pins inside the turbo.  Both the compressor and turbine housings pins will need to be removed in order to rotate the core\u003c\/span\u003e\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":39521719648333,"sku":"BF697560621327","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/IMG_0418_1024x1024_989c1115-5998-48d4-b4f3-664245e2d0fa.png?v=1635607303"},{"product_id":"m112-engine-mount-plates","title":"Engine Mount Plates - m112, m113","description":"\u003cp\u003eOur m112, m113 mount plates will make your engine swap much easier.  These plates are cut from 1\/4\" mild steel right here in Texas.\u003c\/p\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":42114693497051,"sku":"BF697560621341","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20211127-20211127_121959.jpg?v=1638038109"},{"product_id":"m112-m113-exhaust-manifold-flange","title":"Exhaust Manifold Flange - m112, m113","description":"Are you looking to build a custom manifold for your m112\/m113 swap?  Look no further as BenzForce has you covered.  Our 3\/8\" mild steel flanges are cut right here in Texas - we have you covered!","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":42114708308187,"sku":"BF697560621358","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/files\/rn-image_picker_lib_temp_c4ac1fe0-d4ce-48e6-8bf6-025ede1372cb.jpg?v=1741538186"},{"product_id":"om617-oil-pressure-sensor-fitting","title":"om617 Oil pressure sensor fitting","description":"\u003cp\u003e\u003cspan\u003eThe om617 oil pressure sensor fitting is here! Now you can add a 1\/8\"-27 NPT sensor with your transmission adapter without concern about space constraints.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6061 Aluminum banjo to 1\/8\"-27 fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e6061 Banjo bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x Crush washers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eKit does NOT include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eEngine\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSensor\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BenzForce","offers":[{"title":"Default Title","offer_id":42231213490395,"sku":"BF697560621365","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/20211219_100302.jpg?v=1640643791"},{"product_id":"om60x-prechamber-heat-shield","title":"om60x Prechamber Heat Shield","description":"Year Model\u003cbr data-mce-fragment=\"1\"\u003e1984 190D\u003cbr data-mce-fragment=\"1\"\u003e1985 190D\u003cbr data-mce-fragment=\"1\"\u003e1986 190D\u003cbr data-mce-fragment=\"1\"\u003e1987 190D\u003cbr data-mce-fragment=\"1\"\u003e1988 190D\u003cbr data-mce-fragment=\"1\"\u003e1989 190D\u003cbr data-mce-fragment=\"1\"\u003e1987 300D\u003cbr data-mce-fragment=\"1\"\u003e1990 300D\u003cbr data-mce-fragment=\"1\"\u003e1991 300D\u003cbr data-mce-fragment=\"1\"\u003e1992 300D\u003cbr data-mce-fragment=\"1\"\u003e1993 300D\u003cbr data-mce-fragment=\"1\"\u003e1992 300SD\u003cbr data-mce-fragment=\"1\"\u003e1993 300SD\u003cbr data-mce-fragment=\"1\"\u003e1986 300SDL\u003cbr data-mce-fragment=\"1\"\u003e1987 300SDL\u003cbr data-mce-fragment=\"1\"\u003e1987 300TD\u003cbr data-mce-fragment=\"1\"\u003e1991 350SD\u003cbr data-mce-fragment=\"1\"\u003e1990 350SDL\u003cbr data-mce-fragment=\"1\"\u003e1991 350SDL\u003cbr data-mce-fragment=\"1\"\u003e1994 S350\u003cbr data-mce-fragment=\"1\"\u003e1995 S350\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":42638523072731,"sku":"601-017-00-60","price":1.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/om60x-heat-shield.png?v=1648402395"},{"product_id":"om648-turbocharger-oil-return-line-gasket","title":"Turbocharger Oil Return Line Gasket - om648","description":"This grommet goes into the om648 turbo diesel block and allows the drain tube to seal","brand":"Victor Reinz","offers":[{"title":"Default Title","offer_id":42791550583003,"sku":"050-801-40-AB","price":1.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/9489\/3133\/products\/s-l400.jpg?v=1651677709"}],"url":"https:\/\/www.benzforce.com\/collections\/engines.oembed","provider":"BenzForce","version":"1.0","type":"link"}